Agni FYRLAAST Active Repeater Panel
A repeater panel that shows the fire alarm system's status at a second location, with a 7 inch touch screen and keypad that give controls for system reset, accept, mute and silence alarm.
Dealer for AgniAgni FYRLAAST Addressable Fire Alarm Panel, 1, 2 and 4 Loop
An addressable fire alarm control panel in 1, 2 and 4 loop versions, with 254 detectors and devices per loop in any combination. It has a 7 inch touch screen with keypad and a 10,000 event history.
- 1, 2 or 4 loops, 254 devices per loop (1016 on the 4 loop panel)
- 7 inch touch screen LCD with keypad access
- 10,000 event history in non-volatile memory
- Networks up to 512 nodes and supports up to 8 repeater panels
- Works with Modbus, BACnet, TCP/IP and a graphic interface
- Optional panel printer
Standards and approvals: EN-54
Specifications
Agni has not published a specification table for this model. Ask us for the data sheet.
Specifications as published by Agni. Please confirm the exact model with us before ordering.
More Agni Fire Alarm Control Panels
Agni FYRLAAST LCD Passive Repeater Panel
A passive repeater that shows the fire alarm system's status on an LCD at a second location, such as a reception or security desk.
Agni Oriel Series Conventional Fire Alarm Panel, 2 to 8 Zone
A conventional fire alarm control panel in 2, 4, 6 and 8 zone versions for small to medium installations. It watches each zone for fire, fault, open circuit and short circuit, and works with smoke and heat detectors, manual call points and sounders.
Agni Oriel Series Conventional Fire Alarm Panel with PA System
An Oriel series conventional fire alarm panel combined with a PA (public address) system for voice announcements. Agni publishes no details for it online, so FPS confirms the specification on enquiry.
Agni Eco Series Conventional Fire Alarm Panel, 2 and 4 Zone
Sizes: 2zEco, 4zEco
A conventional fire alarm control panel in 2 and 4 zone versions for small to medium installations. It watches each zone for fire, fault, open circuit and short circuit, and works with smoke and heat detectors, manual call points and sounders.
Fire Alarm Control Panels from other brands
Honeywell
Honeywell HS-81/HS/L Compact Fire and Gas Controller (EN version)
The compact EN version of Honeywell's HS-81 fire and gas controller, with a single or double power supply, for industrial sites where space is tight. It handles flame, gas and smoke detection, logic control, extinguishing release and alarm outputs from one panel.
Honeywell
Honeywell HS-81/HS/C Compact Fire and Gas Controller (UL version)
The compact UL version of Honeywell's HS-81 fire and gas controller, with a single or double power supply, for industrial sites where space is tight. Like the EN version, it combines flame, gas and smoke detection, logic control, extinguishing release and alarm outputs in one panel.
Notifier
Notifier ONYX NFS-320E Intelligent Fire Alarm Control Panel
A modular intelligent fire alarm control panel designed for small applications, which can be set up with a few devices or networked for a larger campus or high-rise.
Notifier
Notifier ONYX NFS2-640E Intelligent Fire Alarm Control Panel
A modular intelligent fire alarm control panel designed for mid-sized applications, which can be expanded through Notifier's intelligent fire alarm network.
Morley by Honeywell
Morley by Honeywell DXc1 Single Loop Addressable Fire Alarm Control Panel
A one loop, networkable analogue addressable panel from the Morley EN DXc range that uses the Morley protocol. It works on its own or in a network of DXc panels up to 16 loops.
Morley by Honeywell
Morley by Honeywell DXc2 Two Loop Addressable Fire Alarm Control Panel
A two loop, multi-protocol analogue addressable panel from the DXc range that supports the Morley protocol and networks with other DXc panels up to 16 loops.