Siemens FDCIO221 Cerberus PRO Input/Output Module, 1 Input and 1 Output
An addressable module with one monitored input for a potential-free contact and one output for decentralised control of fire doors, ventilation and air conditioning.
Dealer for SiemensSiemens FDCL221-Ex Cerberus PRO Line Adapter for Ex Areas
A line adapter that electrically isolates Ex and non-Ex lines, so FDnet-Ex and C-NET-Ex devices can run in potentially explosive areas.
- Electrical isolation of Ex and non-Ex lines in FDnet/C-NET
- Operation on stub or loop; two status LEDs; MC link connection
- Fits in fire control panels or an FDCH222 installation housing
- Ex classification [Ex ia Da] IIC and [Ex ia Ga] IIIC
- IP20; 22.5 x 117.6 x 113.8 mm
- Siemens lists EN 54-18, IEC/EN 60079-0, IEC/EN 60079-11, MED and UKCA
Standards and approvals: EN 54-18, MED, UKCA
Specifications
Specifications
| Specification | FDCL221-Ex |
|---|---|
| Standard | IEC/EN 60079-0 , IEC/EN 60079-11 , EN 54-18 |
| Operating voltage | DC 12…33 V, AC 253 V |
| Protection category | IP20 |
| Relative humidity | ≤95 % rel. |
| Storage temperature | -30…+75 °C |
| Operating temperature | -25…60 °C |
| Quiescent current | 1.5 µA |
| Ex-classification | IECEx: [Ex ia Da] IIC, Ta = -25…+60 °C [Ex ia Ga] IIIC, Ta = -25…+60 °C |
| Communication protocol | FDnet/C-NET , FDnet-Ex/C-NET-Ex |
| System compatibility | FDnet > FS20, AlgoRex, SIGMASYS C-NET > FS720 |
| Dimensions (W x H x D) | 22.5 x 117.6 x 113.8 mm |
| Color | Black / Blue |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
More Siemens Interfaces & Modules
Siemens FDCIO222 Cerberus PRO Input/Output Module, 4 Inputs and 4 Outputs, 250 VAC
An addressable module with 4 independent monitored inputs and 4 potential-free relay outputs rated AC 250 V / 4 A for fire control installations.
Siemens FDCIO223 Cerberus PRO Input/Output Module, Transponder
A transponder with 2 configurable inputs/outputs that connects collective detector lines and gives monitored control of dampers, door magnets, alarm devices and extinguishing activation devices.
Siemens FDCIO224 Cerberus PRO Input/Output Module, VdS Interface for Extinguishing
An addressable module with 4 inputs and 4 relay outputs for connecting the VdS interface of extinguishing activating devices.
Siemens FDCI221 Cerberus PRO Input Module, 1 Input
An addressable module with one monitored input for a potential-free contact, for technical states or alarms such as a sprinkler alarm.
Siemens FDCI222 Cerberus PRO Input Module, 4 Inputs
An addressable module with 4 independent monitored inputs for potential-free contacts, for technical states or alarms.
Fire Alarm Interfaces and Modules from other brands
Notifier
Notifier FCM-1 Addressable Control Module
An intelligent addressable control module that supervises wiring to devices powered from an external supply, such as horns, strobes or bells, with Class A or Class B supervision.
Notifier
Notifier FRM-1 Addressable Relay Module
An addressable relay module giving a dry-contact output to switch auxiliary devices such as fans, dampers and control equipment, using one of 159 module addresses on the SLC loop.
Morley by Honeywell
Morley by Honeywell MI/DMMI Addressable Single Input Monitor Module
A single channel addressable input module for Morley-IAS intelligent panels. It watches an external device and reports normal, open circuit and alarm states to the panel.
Morley by Honeywell
Morley by Honeywell MI-MM3E-S2 Mini Monitor Module
A small monitor module that fits in a single gang junction box directly behind the device it monitors, giving a two-wire initiating circuit for normally open fire alarm and security contacts.
System Sensor
System Sensor M201EA-240 Addressable Mains Switching Output Module
A loop-powered output module from the Series 200 plus range that controls an unsupervised double pole output for 240VAC loads, latching on or off on command from the panel.
System Sensor
System Sensor M200E Series Addressable Input/Output and Isolator Modules
Single and multi-way addressable modules on one mechanical platform that can be box, panel or DIN rail mounted, with the address switch and LEDs visible whichever mounting is used.