Dealer for SiemensThe XC360 series single-sector panel for Sinteso peripherals over FDnet, with detection and alarm for up to 126 addressable devices on one loop.
Standards and approvals: EN 54-2, EN 54-4, LPCB
| Specification | XC3610-AA |
|---|---|
| Detector compatibility | See A6V13341134, List of compatibility |
| Standard | EN 54-2 , EN 54-4 , EN 12094-1 |
| Number of addresses | 126 |
| Number of detector lines | 1 loop, 2 stubs |
| Power consumption | 108 VA |
| Supervised output | 2x Horn |
| Mains voltage | AC 196…253 V |
| Number of loops | 1 |
| Operating voltage | AC 196…253 V, 230 V |
| Operating current | 600 mA |
| Bypass time for emergency power supply | 72 h |
| Battery capacity | 25 V/Ah |
| Installation height | 1.6 to 1.7 m |
| Operating temperature | -5…40 °C |
| Storage temperature | -20…+60 °C |
| Relative humidity | ≤95 % rel. |
| Protection category | IP30 |
| Relay outputs | 2-position |
| Color | Signal white, ~RAL 9003 |
| Color housing/cover | Signal white, RAL 9003 / Signal white, RAL 9003 |
| Event memory | max. 2000 events |
| Battery | BAT12-25 |
| Digital inputs/outputs | The mainboard has 4 configurable inputs/outputs. Each can be configured as an input or output. |
| Input voltage | AC 230 V |
| Weight (net) | 7.18 kg (without battery) kg |
Specifications as published by Siemens. Please confirm the exact model with us before ordering.
A compact XC360 series panel for one extinguishing sector, handling detection, evaluation and alarm for up to 126 addressable devices from the Cerberus FIT and Cerberus PRO ranges over C-NET.
The 19 inch rack variant of the XC1001-A for complex multi-sector extinguishing installations, with up to 16 panels in one housing.
A Sinteso 4-loop fire control panel with extinguishing control and an integrated operating unit for up to 504 addresses, in a Large housing with FBA terminal.
A remote extinguishing terminal for one sector, used as the primary terminal for the FC2040-CL or as an extra terminal.
A module bus card that adds single-sector or multi-sector extinguishing control to FC2020 and FC2040 panels in Comfort or Large housings.
Conventional control panel for gas suppression, with 3 detection zones and 1 extinguishing zone that can drive solenoid or Metron actuators. A large LCD countdown timer shows the time to release.
Abort switch for extinguishing systems, compatible with the Rapid-Sense control panel and complying with BS 7273-1 requirements.
A microprocessor based 2 zone panel that detects a fire and releases a gaseous agent, with main and standby cylinder output and several release options.
A microprocessor based 4 zone agent release panel with two release circuits and solenoid coil monitoring, which Ravel states is UL listed.
Microprocessor based panel that controls a gas flooding suppression system, with single or cross zone logic, a pre discharge warning and a 24 VDC gas release output. It includes programmable countdowns, manual abort and false release protection.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
