Ravel Addressable Manual Call Point with Isolator, Single Loop System
An analogue addressable call point for Ravel's single loop system, with a built in isolator and soft addressing from a programming tool.
Dealer for RavelRavel Addressable Manual Call Point, Multi Loop System
An analogue addressable call point for Ravel's multi loop system, certified to EN 54-11 Type A for indoor use and resettable with an element kit.
- EN 54-11 approved, Type A, indoor use
- Resettable with an element kit
- Addressed with an 8 way DIP switch
- Flush or surface mounting
- 24 V DC, low standby current of 0.5 mA
- IP53, 0 to 49 °C
Standards and approvals: EN54-11
Specifications
Specifications
| Specification | RE-717M |
|---|---|
| Operating Voltage | 24VDC. |
| Power-up surge current | 0.8mA |
| Quiescent Current | 0.5mA. |
| Alarm Current | 5.8mA |
| Temperature | 0 to 49 °C |
| Relative Humidity | 0 to 93% non-condensing |
| Connection | 2.5mm2 Max. |
| Weight | 125g. |
| IP Rating | IP 53 |
| Dimension | 92mm X 92mm X 48 mm |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Manual Call Points
Ravel Conventional Manual Call Point, Red, Resettable
A red resettable call point for conventional fire alarm systems, in a plastic housing with a red alarm LED.
Ravel Manual Pull Station, Die Cast, Single or Dual Action
A red die cast manual pull station with a lift and pull action and a break glass cover, listed by Ravel for its multi loop and conventional systems. Ravel provides a UL certificate for it.
Manual Call Points from other brands
Notifier
Notifier NBG-12LX Addressable Dual-Action Pull Station
A dual-action pull station with a built-in addressable interface, for any Notifier intelligent panel except the FireWarden series and the NSP-25 panel.
Notifier
Notifier NOT-MCP-G-I Addressable Manual Call Point
A non-coded addressable call point that gives a Notifier intelligent panel one addressable alarm point. It works with all Notifier intelligent panels and runs automatically in FlashScan mode.
Morley by Honeywell
Morley by Honeywell HM-MCP-G-UL-I Addressable Break Glass Manual Call Point (Morley UL)
An addressable break glass call point for the Morley UL range, addressed with a rotary decade switch and tested with a specialist key that lowers the glass and releases the micro-switch.
System Sensor
System Sensor MCP2A Conventional Indoor Manual Call Point, Red (with or without Backbox)
A red conventional indoor call point with a plug and play terminal block, available without a backbox (MCP2A/R470FF/01) or with a backbox (MCP2A/R470SF/01). It can be set up as break glass or resettable by changing the element.
System Sensor
System Sensor MUS3A/Y000FF/11 Single-Pole Flexi-Element Manual Call Point, without Backbox
A single-pole flexi-element call point for flush mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
Apollo
Apollo Intelligent Manual Call Point, Red, with Isolator
An addressable manual call point for raising the fire alarm by hand, with a resettable operating element and a built-in isolator. It works with XP95, Discovery and CoreProtocol.