Ravel Addressable Manual Call Point, Multi Loop System
An analogue addressable call point for Ravel's multi loop system, certified to EN 54-11 Type A for indoor use and resettable with an element kit.
Dealer for RavelRavel Addressable Manual Call Point with Isolator, Single Loop System
An analogue addressable call point for Ravel's single loop system, with a built in isolator and soft addressing from a programming tool.
- Complies with EN 54-11, Type A, indoor use
- Built in isolator
- Soft addressing using a programming tool
- Resettable with an element kit
- Flush or surface mounting
- 24 V DC, IP50, 0 to 49 °C
Standards and approvals: EN54-11
Specifications
Specifications
| Specification | RE-737M |
|---|---|
| Operating Voltage | 24VDC |
| Quiescent Current | 0.5mA |
| Alarm Current | 2.5mA |
| Operating Temperature | 0° to 49°C |
| Relative Humidity | 0 to 93% non-condensing |
| Storage temp | 0°C to 60°C |
| Connection | 2.5mm(2) Max |
| Wight | 125g |
| IP Rating | IP 50 |
| Dimension | 86mm X 86mm X 50mm |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Manual Call Points
Ravel Conventional Manual Call Point, Red, Resettable
A red resettable call point for conventional fire alarm systems, in a plastic housing with a red alarm LED.
Ravel Manual Pull Station, Die Cast, Single or Dual Action
A red die cast manual pull station with a lift and pull action and a break glass cover, listed by Ravel for its multi loop and conventional systems. Ravel provides a UL certificate for it.
Manual Call Points from other brands
Notifier
Notifier NBG-12LX Addressable Dual-Action Pull Station
A dual-action pull station with a built-in addressable interface, for any Notifier intelligent panel except the FireWarden series and the NSP-25 panel.
Notifier
Notifier NOT-MCP-G-I Addressable Manual Call Point
A non-coded addressable call point that gives a Notifier intelligent panel one addressable alarm point. It works with all Notifier intelligent panels and runs automatically in FlashScan mode.
Morley by Honeywell
Morley by Honeywell HM-MCP-G-UL-I Addressable Break Glass Manual Call Point (Morley UL)
An addressable break glass call point for the Morley UL range, addressed with a rotary decade switch and tested with a specialist key that lowers the glass and releases the micro-switch.
System Sensor
System Sensor MCP2A Conventional Indoor Manual Call Point, Red (with or without Backbox)
A red conventional indoor call point with a plug and play terminal block, available without a backbox (MCP2A/R470FF/01) or with a backbox (MCP2A/R470SF/01). It can be set up as break glass or resettable by changing the element.
System Sensor
System Sensor MUS3A/Y000FF/11 Single-Pole Flexi-Element Manual Call Point, without Backbox
A single-pole flexi-element call point for flush mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
Apollo
Apollo Intelligent Manual Call Point, Red, with Isolator
An addressable manual call point for raising the fire alarm by hand, with a resettable operating element and a built-in isolator. It works with XP95, Discovery and CoreProtocol.