Bosch FCP-OT320 Conventional Optical/Thermal Multisensor Detector, 820 or 470 Ohm (FCP-OT320-R470)
A conventional multisensor detector that combines an optical smoke sensor with a heat sensor, offered with an 820 ohm or a 470 ohm alarm resistor.
Dealer for BoschBosch FCP-O320 Conventional Optical Smoke Detector, 820 or 470 Ohm (FCP-O320-R470)
A conventional optical smoke detector from the FCP-320 series, offered with an 820 ohm alarm resistor (FCP-O320) or a 470 ohm alarm resistor (FCP-O320-R470).
- Evaluation electronics for reliable detection
- Drift compensation adjusts the threshold if the optical sensor gets dirty
- Dust-repellent labyrinth and cap
- Removal lock that can be switched on or off; remote alarm indicator can be connected
- Operating voltage 8.5 to 30 V DC, operating temperature -20 to 65°C
- Bosch lists CPR, VdS and CMIM certificates
Standards and approvals: CMIM, CPR, VdS
Specifications
Specifications
| Specification | FCP-O320 | FCP-O320-R470 |
|---|---|---|
| Weight (g) | 76 | 76 |
| Operating voltage (VDC) | 8.5 to 30 | 8.5 to 30 |
| Current consumption (mA) | 0.12 | 0.12 |
| Operating temperature (°C) | -20 to 65 | -20 to 65 |
| Permissible air speed (m/s) | 20 | 20 |
| Operating relative humidity, non-condensing (%) | 0 to 95 | 0 to 95 |
| Color | White | White |
| Material | Plastic | Plastic |
| Detection principle | Optical | Optical |
Specifications as published by Bosch. Please confirm the exact model with us before ordering.
More Bosch Conventional Detectors
Bosch FCP-OC320 Conventional Optical/Chemical Multisensor Detector, 820 or 470 Ohm (FCP-OC320-R470)
A conventional multisensor detector that combines an optical smoke sensor with a chemical (gas) sensor, offered with an 820 ohm or a 470 ohm alarm resistor.
Bosch FCH-T320 Conventional Heat Detector, Rate-of-Rise and Maximum, 820 Ohm
A conventional heat detector that responds to a rapid rise in temperature and to a maximum temperature, with an 820 ohm alarm resistor.
Bosch FCH-T320-R470 Conventional Heat Detector, Rate-of-Rise and Maximum, 470 Ohm
The 470 ohm alarm resistor version of the FCH-T320 conventional heat detector, for panels that expect a 470 ohm alarm load.
Bosch FCP-O 500 Conventional Optical Smoke Detector, Ultra-Flat, FCP-500 Series
A conventional optical smoke detector with an ultra-flat design for flush ceiling mounting, colour matched to the room with toning inserts.
Bosch FCP-OC 500 Conventional Optical/Chemical Multisensor Detector, Ultra-Flat, FCP-500 Series
A conventional multisensor detector with an optical sensor and an additional gas sensor, in the ultra-flat FCP-500 design for flush ceiling mounting.
Smoke and Heat Detectors from other brands
Honeywell
Honeywell FDC-101 Wi-Fi Smoke Detector (IMPACT by Honeywell)
A battery operated, Wi-Fi enabled photoelectric smoke detector from the IMPACT by Honeywell range. When smoke reaches its alarm threshold it sounds a buzzer, flashes an LED and sends real-time alerts to a smartphone through the IMPACT by Honeywell app.
Honeywell
Honeywell SSD-100 Standalone Smoke Detector (IMPACT by Honeywell)
A battery operated standalone smoke alarm with photoelectric sensing that sounds an alarm and lights a red LED when smoke reaches its threshold. It runs on two AA batteries and also warns of a low battery or a chamber fault.
Notifier
Notifier FSP-951 Intelligent Photoelectric Smoke Detector
An intelligent addressable photoelectric smoke detector with an optical chamber that senses smoke from a wide range of fires, and sensitivity that is programmable and monitored by the panel.
Notifier
Notifier FSP-951T Photoelectric Smoke Detector with Thermal Sensing
An intelligent photoelectric smoke detector with dual thermistors that add 135°F (57°C) fixed temperature heat sensing in the same head.
Morley by Honeywell
Morley by Honeywell HM/PSE/S2 Photoelectric Smoke Detector (DXc and ZXSe)
An S200A plug-in photoelectric smoke detector listed with the DXc and ZXSe panels. Its detection chamber is designed to cut false alarms from dust, insects and other debris.
Morley by Honeywell
Morley by Honeywell HM/PTSE Photo-Thermal Multi-Criteria Detector (DXc and ZXSe)
An S200A multi-criteria detector that adds 58°C fixed temperature and rate of rise thermal sensing to a photoelectric smoke sensor, for better false alarm immunity and faster response to a wide range of fires.