System Sensor ECO1003A Conventional Photoelectric Smoke Detector (ECO1000)
A low profile conventional photoelectric smoke detector with an optical chamber and an ASIC for quick, accurate detection, designed to extend the interval between cleanings.
Dealer for System Sensor
System Sensor Vision 2020PT Conventional Photo-Thermal Detector
A Vision multi-criteria detector that combines an optical chamber and a thermal element for a faster response to real fires and fewer environmental false alarms.
- Photoelectric and thermal sensing
- Automatic drift compensation, 75µA standby at 24VDC
- Latching LED with remote LED option
- 14 to 28VDC, -30 to +70°C, ABS, 78g plus 45g for the standard base
- Standard and deep bases with or without Schottky diode
- EN 54 parts 5 and 7, CPD approved
Standards and approvals: EN54 part 5 and part 7, CPD
Specifications
Specifications
| Specification | 2020PT |
|---|---|
| Operating Voltage Range | 14 to 28VDC (Nominal 24VDC) |
| Maximum Standby Current | 75µA @ 24VDC |
| Maximum Alarm Current | 70mA @ 28VDC |
| Application Temperature Range | -30°C to +70°C |
| Humidity | 5 to 95% Relative Humidity (non-condensing) |
| Height | 40.5mm (plus 9.5mm for standard base) |
| Diameter | 102mm |
| Weight | 78g (plus 45g for standard base) |
| Max Wire Gauge for Terminals | 0.4mm2 to 2.0mm2 |
| Colour | Approximates to RAL9016 |
| Material | ABS |
Specifications as published by System Sensor. Please confirm the exact model with us before ordering.
More System Sensor Conventional Detectors
System Sensor ECO1002A Conventional Photo-Thermal Detector (ECO1000)
A multi-criteria conventional detector that combines an optical chamber and a thermal element with a microprocessor, for a faster response to real fires and fewer environmental false alarms.
System Sensor ECO1004T, ECO1005 and ECO1005T Conventional Heat Detectors (ECO1000)
Three conventional heat detectors covering 58°C and 78°C fixed temperature and rate of rise, for small to medium systems such as small industrial units, retail units and guest houses.
System Sensor 2351E Conventional Photoelectric Smoke Detector (Series 300)
A Series 300 photoelectric smoke detector that works on a conventional zone but adds intelligent maintenance features through a hand-held tool.
System Sensor 2351TEM Conventional Photo-Thermal Detector (Series 300)
A Series 300 photo-thermal detector whose on-board processor only signals an alarm once it is satisfied that a fire has started, reducing nuisance alarms while improving response.
System Sensor Series 300 Conventional Heat Detectors (5351TE, 5351EA, 4351EA)
Three Series 300 heat detectors: 58°C fixed temperature (5351TE), 78°C fixed temperature (4351EA) and rate of rise (5351EA), with a latching LED and an optional remote LED annunciator.
Smoke and Heat Detectors from other brands
Honeywell
Honeywell FDC-101 Wi-Fi Smoke Detector (IMPACT by Honeywell)
A battery operated, Wi-Fi enabled photoelectric smoke detector from the IMPACT by Honeywell range. When smoke reaches its alarm threshold it sounds a buzzer, flashes an LED and sends real-time alerts to a smartphone through the IMPACT by Honeywell app.
Honeywell
Honeywell SSD-100 Standalone Smoke Detector (IMPACT by Honeywell)
A battery operated standalone smoke alarm with photoelectric sensing that sounds an alarm and lights a red LED when smoke reaches its threshold. It runs on two AA batteries and also warns of a low battery or a chamber fault.
Notifier
Notifier FSP-951 Intelligent Photoelectric Smoke Detector
An intelligent addressable photoelectric smoke detector with an optical chamber that senses smoke from a wide range of fires, and sensitivity that is programmable and monitored by the panel.
Notifier
Notifier FSP-951T Photoelectric Smoke Detector with Thermal Sensing
An intelligent photoelectric smoke detector with dual thermistors that add 135°F (57°C) fixed temperature heat sensing in the same head.
Morley by Honeywell
Morley by Honeywell HM/PSE/S2 Photoelectric Smoke Detector (DXc and ZXSe)
An S200A plug-in photoelectric smoke detector listed with the DXc and ZXSe panels. Its detection chamber is designed to cut false alarms from dust, insects and other debris.
Morley by Honeywell
Morley by Honeywell HM/PTSE Photo-Thermal Multi-Criteria Detector (DXc and ZXSe)
An S200A multi-criteria detector that adds 58°C fixed temperature and rate of rise thermal sensing to a photoelectric smoke sensor, for better false alarm immunity and faster response to a wide range of fires.