Fire Protection System (FPS), a Honeywell dealer in Bhopal, supplies Honeywell FK-5-1-12 and HFC-227ea clean agent systems, INFERNO SHIELD, the rack mount suppression unit and the IG-541 inert gas system. FPS installs, tests, commissions and maintains them across Madhya Pradesh.
Sizes: 25 Bar, 34.5 Bar, 42 Bar
A super-pressurised clean agent system using FK-5-1-12 fluid for water-averse areas, such as those once protected by Halon 1301. It reaches extinguishing levels within 10 seconds and suits combustible, electrical and flammable liquid fires.
A clean agent suppression system for large-volume, high-risk spaces where fast extinguishing and business continuity are critical. It has zero ozone depletion potential and is safe for use where people are present.
Sizes: 25 Bar, 42 Bar
A high-pressure clean agent system, super-pressurised with dry nitrogen and discharged as a vapour into the protected area within 10 seconds. It suits occupied areas and critical installations with electrical or electronic fire risks.
A do-it-yourself suppression unit for equipment racks that uses a clean agent safe for PCBs. It covers racks of 1.5 m3 to 3 m3 and uses cross zone smoke detection to help reduce the risk of electrical fires.
Sizes: 30 L, 50 L, 80 L, 140 L
An inert gas system that puts out class A, B and C fires by lowering the oxygen level in the room, using a blend of 52% nitrogen, 40% argon and 8% CO2. It comes as a stand-alone system for one space or as a multi-zone system.
Clean agent systems put out fire without water, which suits rooms with equipment or collections that should not get wet. Honeywell offers two clean agents. FK-5-1-12 is clean, colourless, odourless and non-toxic, has zero ozone depletion potential (ODP) and a 5-day atmospheric lifetime, reaches extinguishing levels within 10 seconds, and is offered at 25 bar, 34.5 bar and 42 bar. HFC-227ea is super-pressurised with dry nitrogen to 25 bar (360 psi), also comes in a 42 bar version, has zero ODP and is discharged as a vapour within 10 seconds. Honeywell states that the FK-5-1-12 system complies with NFPA 2001, the NFPA standard for clean agent fire extinguishing systems.
INFERNO SHIELD is Honeywell's FK-5-1-12 clean agent system for large-volume, high-risk spaces where fast extinguishing and business continuity matter. For a single equipment rack, the rack mount suppression unit uses a clean agent that is safe for PCBs, covers racks of 1.5 m3 to 3 m3, uses cross zone smoke detection, and has an LCD display, open door alarm, visual alarm with fault status, 24 hour battery backup and relay contacts for BMS integration.
The Honeywell inert suppression system uses IG-541, a blend of 52% nitrogen, 40% argon and 8% CO2. Once ventilation in the room has stopped, it puts out class A, B and C fires by lowering the oxygen level from 20.9% to between 10% and 14.2%. On an alarm, the fire alarm panel runs a pre-programmed delay before a solenoid releases the agent. A stand-alone system protects one space, while a multi-zone system adds zone valves and a starter kit to send the agent only to the section where the fire was detected.
FPS supplies, installs, tests, commissions and maintains Honeywell suppression systems in Bhopal and across Madhya Pradesh.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
