Fire Protection System (FPS), a Honeywell dealer in Bhopal, supplies cylinders, valves, hoses, nozzles, actuators, switches and fittings for Honeywell FK-5-1-12 and HFC-227ea clean agent systems at 25 bar and 42 bar. FPS installs, tests and maintains them across Madhya Pradesh.
Sizes: 34 L, 120 L, 140 L, 180 L
A seamless cylinder for HFC-227ea and FK-5-1-12 clean agents, fitted with a siphon tube, cylinder valve, actuation port for the electric control head, discharge outlet port and pressure gauge.
A check valve fitted at the discharge manifold of a multiple cylinder system that prevents back flow from the manifold if the system discharges unintentionally.
A mild steel strap that holds clean agent cylinders in the vertical position.
A flexible hose that connects the cylinder valve to the pipe, the manifold or the check valve in HFC-227ea and FK-5-1-12 systems.
Brass nozzles that set the flow rate and spread the agent through the protected area, attached to the discharge piping by a female NPT thread.
An electromechanical actuator mounted on the master cylinder actuation port that opens the cylinder on a 24 V DC signal from the fire alarm panel. It also has a manual release plunger.
A 1/4 inch hose that connects pressure activated devices, such as the N2 pilot cylinder, slave cylinders and pressure switch, to the system.
A switch mounted on the manifold or piping that operates under discharge pressure and signals the panel that the system has actuated. It has a reset button that must be pressed after a discharge.
Connects a flexible actuation hose to the master cylinder assembly, so that the master cylinder can actuate the slave clean agent cylinders.
Fitted to each slave cylinder valve in multiple cylinder FK-5-1-12 and HFC-227ea systems. When the electric control head opens the master cylinder, the master cylinder's pressure makes each head open its own cylinder valve.
Brass male tee and elbow fittings that connect the actuation hose to the pressure operated control heads in multiple cylinder systems.
These parts make up a Honeywell FK-5-1-12 or HFC-227ea clean agent system. The agent is stored in a seamless cylinder with a siphon tube, cylinder valve, actuation port, discharge outlet and pressure gauge, offered in 34, 80, 120, 140 and 180 litre sizes, either as a standard unit or with a Switch-in-Gauge that monitors cylinder pressure. Mild steel straps hold the cylinders upright.
Release starts at the master cylinder. The electric-cum-manual actuator (electric control head) sits on its actuation port and opens it on a 24 V DC signal from the fire alarm panel, or by hand with its manual plunger, and a supervisory switch tells the releasing panel if the head is taken off. In a multiple cylinder system, the master cylinder adapter kit and 1/4 inch flexible actuation hoses carry pressure to a pressure operated control head on each slave cylinder, which then opens that cylinder's valve. Male tees link the hose from one slave cylinder to the next, and an elbow ends the line at the last one.
From each cylinder, a flexible discharge hose leads to the pipe, the manifold or a check valve. Manifold check valves, fitted vertically, stop back flow from the manifold if the system discharges unintentionally. Brass nozzles with female NPT threads set the flow rate and spread the agent through the protected area, in 180 or 360 degree patterns. A manifold discharge pressure switch tells the panel that the system has discharged, and its reset button must be pressed afterwards.
Match parts to the system pressure. The 1.5 inch (40NB) check valve suits 42 bar systems and the 2 inch (50NB) one suits 25 bar systems; NB means nominal bore, the pipe size. Discharge hoses come in both sizes, with working pressures of 90 bar (1.5 inch) and 80 bar (2 inch). FPS supplies and fits these components in Bhopal and across Madhya Pradesh.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
