Honeywell EVACPRO-MIC Call Station for Evacpro-G2
The call station microphone of the Evacpro-G2 voice alarm system. It links to the controller over RJ45, with two-way RS485 digital communication over distances up to 300 m.
Dealer for Honeywell
Honeywell PAVA Call Stations and Keypads in Bhopal
Fire Protection System (FPS), a Honeywell dealer in Bhopal, supplies Honeywell call stations, paging consoles, microphones and extension keypads for the Evacpro-G2, Intevio, X-618, Variodyn D1 and RAAGA 4 voice alarm systems. FPS installs, commissions and maintains them across Madhya Pradesh.
Where to use Call Stations & Keypads
- Offices and commercial buildings
- Shopping malls and retail
- Food courts
- Hotels, including 5-star hotels
- Stadiums and exhibition halls
- Airports and metros
- Residential buildings
- Sites where public messages change often and must be updated quickly
Honeywell Call Stations & Keypads models
Honeywell Intevio HMC-2000 Call Station
The call station of the Intevio system for live paging and for starting background music, service or emergency broadcasts. It can record a temporary message and broadcast it straight away without configuration.
Honeywell Intevio HMC-K8 Keypad Extension, 8 Keys
A keypad that adds 8 physical keys to the RK-MIC for faster manual operation. Each key can be set for zone selection, group selection, broadcast task selection, volume control or zone close.
Honeywell X-618 X-NPMS Network Paging Station, 7 inch Touch Screen
A touch screen paging station that connects to the X-618 system over Ethernet for live paging, audio task delivery, zone audio monitoring and intercommunication. Honeywell lists it under two codes, X-NPMS and X-NPMS-R.
Honeywell X-618 X-NPMK-B Network Paging Console, Key Operated
A key operated paging console for zone paging and broadcast control on an X-618 system on the same network.
Honeywell X-618 HN-PTT Push-to-Talk Microphone
A dynamic push-to-talk (PTT) microphone with a remote switching contact, offered as an optional part for the X-DCS2000/EN and X-NPMR.
Honeywell X-618 X-K4 Extension Keypad, 4 Keys
An extension keypad that adds 4 physical keys to the X-NPMS or X-NPMK paging station, for quicker manual operation in an emergency.
Honeywell X-618 X-K8 Extension Keypad, 8 Keys
An extension keypad with 8 configurable keys and 8 indicator LEDs for the X-NPMS or X-NPMK paging station. Keys can be set for zone selection, group selection, broadcast task selection, volume control or zone close.
Honeywell Variodyn D1 DCS Plus Digital Call Station
A digital call station for voice announcements, gongs and alarms on the Variodyn D1 system; Honeywell's description covers the DCS15 and DCS2 versions. Each call station sends and receives its own voice transmissions and control signals independently.
Honeywell Variodyn D1 DKM plus Key Module
A key module that expands a Variodyn D1 digital call station with more keys and LEDs, making it simple to select loudspeaker circuits for announcements.
Honeywell Variodyn D1 ETCS Touch Screen Call Station
A call station with a 7 inch touch screen and a covered red button for emergency announcements. Four bi-colour LEDs show microphone fault, system fault and the state of its two redundant cables.
Honeywell RAAGA 4 HN-CP16, HN-CP32 and HN-CP64 Call Stations
Table top or 19 inch rack mount call stations for RAAGA 4 HN-MEVAC controllers, with zone selection of 1 to 64 (HN-CP16), 1 to 128 (HN-CP32) or 1 to 256 (HN-CP64) zones. A gooseneck microphone with XLR connector can be fitted.
How to choose
A call station is the desk unit used to make live announcements and to start recorded or emergency messages over a PAVA (public address and voice alarm) system. Choose the one made for your system range: HMC-2000 for Intevio, X-NPMS and X-NPMK for X-618, DCS Plus and ETCS for Variodyn D1, HN-CP for RAAGA 4 HN-MEVAC controllers, and EVACPRO-MIC for Evacpro-G2.
Then choose keys or a touch screen. The HMC-2000 has 8 freely configurable buttons, volume control, a monitor loudspeaker and automatic fault detection, and can record a temporary message and play it at once. The X-NPMK-B is key operated, with a removable gooseneck microphone. The X-NPMS uses a 7 inch touch screen, and the Variodyn D1 ETCS adds a covered red button for emergency announcements and a redundant transmission route to its 7 inch touch screen.
If you need more keys, add extension keypads. The HMC-K8 adds 8 configurable keys with two-colour LEDs. The X-K4 (4 keys with transparent covers) and X-K8 (8 keys with two-colour LEDs) fit the X-NPMS or X-NPMK, up to 8 keypads per station. The DKM plus adds keys and LEDs to a Variodyn D1 call station, and up to 3 can be fitted to an ETCS, each with 18 keys and 18 LEDs.
On large sites, check the distance: Variodyn D1 DCS call stations can sit up to 300 m from the system, or up to 20 kilometres with fibre optic cabling, and Evacpro-G2 call stations communicate over RS485 for up to 300 m. EN 54-16, the European standard for voice alarm control and indicating equipment, is listed for the HMC-K8, DCS Plus, DKM plus and ETCS. FPS supplies, installs and maintains these call stations in Bhopal and across Madhya Pradesh.
Frequently asked questions
What is a PAVA call station used for?
It is used to make live announcements to chosen zones and to start background music, recorded messages or emergency broadcasts over the public address and voice alarm system.
Can I add more buttons to a call station?
Yes. The HMC-K8 adds 8 keys, the X-K4 and X-K8 extension keypads add 4 or 8 keys to the X-618 paging stations (up to 8 keypads each), and DKM plus modules add 18 keys and 18 LEDs each to Variodyn D1 call stations.
How far can a call station be from the controller?
Variodyn D1 DCS call stations can be up to 300 m away, or up to 20 kilometres with fibre optic cabling. Evacpro-G2 call stations use RS485 communication over distances up to 300 m.
Which microphone options are available?
The X-NPMS-R takes an optional gooseneck or PTT microphone, the HN-PTT is a dynamic push-to-talk microphone for the X-DCS2000/EN and X-NPMR, the ETCS has a replaceable electret gooseneck microphone, and the HN-CP call stations take a gooseneck microphone with XLR connector.
Is FPS a Honeywell dealer for call stations in Bhopal?
Yes. FPS is a Honeywell dealer and supplies, installs and maintains Honeywell call stations and keypads in Bhopal and across Madhya Pradesh. Prices are on request: call or WhatsApp +91 92440 89060.