Karam Portable Single Gas Detector, Oxygen (O2)
A compact portable detector that keeps watch on the oxygen level around the user and alerts by light, sound and vibration. Model GDU-D-110, about 105 g with its battery clip.
Supplier for Karam
Karam Portable Gas Detectors in Bhopal: O2, CO and H2S
Fire Protection System (FPS), a Karam supplier in Bhopal, supplies Karam portable single gas detectors for oxygen (O2), carbon monoxide (CO) and hydrogen sulfide (H2S) across Madhya Pradesh. Each unit watches one gas continuously and warns the user with light, sound and vibration.
Where to use Gas Detection
- Mining operations
- Refineries
- Petroleum extraction sites
- Manufacturing plants
- Confined spaces, where a small portable detector is easy to carry
- Work areas where the oxygen level must be watched (O2 version)
- Areas where carbon monoxide can build up (CO version)
- Areas where hydrogen sulfide may be present (H2S version)
Karam Gas Detection models
Karam Portable Single Gas Detector, Carbon Monoxide (CO)
The carbon monoxide version of Karam's single gas detector, small enough to carry into confined spaces, with a three way alarm of light, sound and vibration. Model GDU-D-210, about 94 g with its battery clip.
Karam Portable Single Gas Detector, Hydrogen Sulfide (H2S)
A light single gas detector set up for hydrogen sulfide, for workers in refining, petroleum extraction, mining and manufacturing. Model GDU-D-310, about 93 g with its battery clip, with light, sound and vibration alerts.
How to choose
A single gas detector watches one gas. Karam makes the same compact detector in three versions: GDU-D-110 for oxygen (O2), GDU-D-210 for carbon monoxide (CO) and GDU-D-310 for hydrogen sulfide (H2S). Choose the version for the gas named in your risk assessment or work permit, and plan one unit per gas if the job carries more than one gas risk.
Once switched on, the detector runs continuously and raises its alarm three ways, by light, sound and vibration, so a warning can be seen, heard or felt. The controls are kept simple, the body has a rubber covering, and the sensor and battery can both be replaced.
For hazardous areas, Karam lists the detectors to IEC 60079-0:2017, IEC 60079-11:2011, IEC 60079-26:2014-10, EN IEC 60079-0:2018 and EN 60079-11:2012, with IECEx, ATEX 2014/34/EU and PESO certification. The IEC 60079 series covers equipment for explosive atmospheres, and part 11 deals with intrinsic safety, a design that limits electrical energy so the device cannot ignite the gas around it. Check these listings against your site's hazardous area requirements before use.
The units weigh between 93 g and 105 g with the battery clip, depending on the gas. FPS supplies them in Bhopal and across Madhya Pradesh; prices are on request: call or WhatsApp +91 92440 89060.
Frequently asked questions
Which gases do Karam single gas detectors cover?
Karam lists three versions: GDU-D-110 for oxygen (O2), GDU-D-210 for carbon monoxide (CO) and GDU-D-310 for hydrogen sulfide (H2S). Each unit monitors one gas.
How does the detector warn the user?
It works continuously while switched on and gives light, sound and vibration alerts, so the warning reaches the user even if one of those signals is missed.
Are Karam gas detectors certified for hazardous areas?
Karam lists IECEx, ATEX 2014/34/EU and PESO certification, with the IEC 60079 and EN 60079 standards for equipment used in explosive atmospheres. Check the listings against your site's hazardous area requirements.
Can the sensor and battery be replaced?
Yes. Karam states that the sensors and batteries of these detectors are replaceable.
Where can I buy Karam gas detectors in Bhopal?
FPS is a Karam supplier and supplies these detectors in Bhopal and across Madhya Pradesh. Prices are on request: call or WhatsApp +91 92440 89060.