Fire Protection System (FPS), a Karam supplier in Bhopal, supplies Karam hand protection across Madhya Pradesh: latex, PU and nitrile coated work gloves, cut resistant HPPE and aramid gloves, chemical and disposable gloves, leather welding gloves and arm sleeves. Each model page lists the standards Karam states for it.
Karam work gloves with a crinkle finish latex palm on a seamless polyester liner, for a firm grip on rough or wet items, stated to EN 388:2016. HS01 has an orange liner with black latex (Prokut range); HS02 is brown and black, in sizes M and L.
Sturdy Karam latex gloves on a polycotton liner with a crinkle latex coating for grip, stated to EN 388:2016. HS11 (white liner, orange latex) is dipped over 70% of the back of the hand including the thumb; HS03 (dark and light blue) comes in sizes M and L.
Thin Karam gloves with a polyurethane (PU) palm on a seamless polyester liner, made low lint for clean, delicate work such as electronics and pharma handling, stated to EN 388:2016. HS21 is white and HS22 is black, the HS22 in M, L and XL (240, 250 and 260 mm long).
Karam general purpose gloves with a polyurethane palm on a polyester liner, giving good grip in dry and mildly oily conditions, stated to EN 388:2016. HS23 is white and HS24 is black, both in sizes M and L.
A Karam glove with a smooth grey nitrile coating on a white, seamless, low lint polyester liner, holding a sure grip on oily components, stated to EN 388:2016. Sizes M, L and XL (240, 250 and 260 mm long).
Flexible Karam work gloves with a flat nitrile palm coating on a polyester liner, for a sure grip in dry and oily work, stated to EN 388:2016. HS32 is white and grey; HS33 is black and lilac with a knit wrist; both in sizes M and L.
A Karam glove with the maker's patented nitrile sponge palm coating and a sanitized antimicrobial finish, stated to EN 388:2016. It also gives light heat protection up to 100°C for a short period; black and grey, sizes M and L.
Karam gloves dipped fully in nitrile over a seamless polyester liner, keeping liquids and oils off the whole hand and protecting from non hazardous solvents, stated to EN 388:2016. HS91 has a red liner with a smooth black finish; HS92(FC) is black and blue; both in sizes M and L.
A Karam glove with a sandy nitrile finish over a flat nitrile layer on a soft 15 gauge polyester liner, coated over more than 70% of the back of the hand including the thumb, stated to EN 388:2016. Grey and black, sizes M and L.
Cut and sewn Karam gloves with a cotton jersey liner fully coated in nitrile, which repels oil and resists abrasion, stated to EN 388:2016. Offered as HS201(KW) and HS201(SC), the latter with a safety cuff; blue and white, size L.
A heavy duty Karam glove with a seamless nylon shell fully coated in a special nitrile formulation that repels oil and liquids and gives light chemical protection, stated to EN 388:2016 and EN 407:2020. Blue, size L.
Karam cut resistant gloves knitted from an HPPE (high performance polyethylene) blend with a PU coated palm and open back, stated to EN 388:2016 and passing the EN 407:2020 contact heat test. HS41 is grey and HS51 is black, in M, L and XL (240, 250 and 260 mm long).
A Karam HPPE blend glove with a blue embossed latex palm in a cross pattern for grip, stated to EN 388:2016 and passing the EN 407:2020 contact heat test. Sizes M, L and XL (240, 250 and 260 mm long).
A Karam 13 gauge HPPE and spandex glove listed with high TDM cut resistance (the cut test used in EN 388:2016) and a black nitrile micro foam coating that grips in wet or oily work. Stated to EN 388:2016; sizes M, L and XL.
A Karam glove made from high cut resistant HPPE and spandex fibre for sharp items such as glass and metal sheet, with a black nitrile micro foam coating for wet or oily grip. Stated to EN 388:2016; sizes M, L and XL.
Grey Karam cut resistant gloves with a liner of HPPE and glass fibre and a polyurethane palm, keeping flexibility and touch sensitivity for mechanical work, stated to EN 388:2016. HS44 comes in XS, S, M and L; HS62, with a rough PU grip and elasticated knit wrist, comes in S, M, L and XL.
A light Karam glove on a plaited composite liner of HPPE, glass, nylon and spandex giving cut level B, with an NFT coating and KTCR reinforcement at the thumb and forefinger. Karam states it to EN 388:2016, EN 407:2020, ANSI A2 and ANSI 4, in sizes S to 3XL.
An ultra light Karam glove with a second skin NFT coating on an engineered HPPE, glass, nylon and spandex liner rated cut level C, gripping in oily, dry and wet conditions. Karam states it to EN 388:2016, ANSI A3, ANSI 4 and AS/NZS 2161.3 2020, in sizes S to 3XL.
The only cut level F glove on this page: a fine gauge Karam liner of HPPE, nylon, spandex and steel with an NFT coating and thumb and forefinger reinforcement. Stated to EN 388:2016, ANSI A6 and ANSI 4.
A Karam glove on a composite Ricotech liner with a nitrile sponge coating that grips in dry and oily work and protects from oils, hydrocarbons and grease. Stated to EN 388:2016 and passing the EN 407:2020 contact heat test (clause 4.5.3); sizes M and L.
A thin, light Karam glove with an HPPE blend shell rated cut level D and a double dipped nitrile coating over the full hand, with a sandy palm finish for grip in dry and oily work. Stated to EN 388:2016; orange and black, sizes M and L.
A Karam cut resistant glove with an HPPE and glass liner and a natural rubber palm coating in a crinkle finish, built dense for abrasion, puncture and tear resistance. Stated to EN 388:2016; black and white melange, sizes M, L and XL.
A Karam knitted glove of HPPE and glass fibre with no coating listed, giving cut resistance with comfort and flexibility for checking and maintenance tasks, stated to EN 388:2016. White and black melange, size L.
A Karam glove for heavy work with an HPPE and glass liner, a sandy nitrile palm for grip, and dense moulded TPR (thermoplastic rubber) zones over the knuckles, fingers, thumb and back of the hand. Stated to EN 388:2016; orange, grey and black, size L.
Yellow Karam gloves knitted from genuine Kevlar fibre in 10 gauge, combining cut protection and contact heat protection, stated to EN 388:2016 and EN 407:2020. Ambidextrous, in sizes XS, S, M and L.
Heavy weight Karam gloves with a double layer shell, Kevlar outside and cotton inside, for thermal and cut protection, stated to EN 388:2016 and EN 407:2020. Yellow, ambidextrous, size XL.
Yellow Karam gloves knitted from para-aramid yarn for cut and contact heat protection, stated to EN 388:2016 and EN 407:2020. Ambidextrous, size L.
Blue, ambidextrous Karam disposable nitrile gloves for industrial use, with textured fingertips and a beaded cuff, stated to EN ISO 374-1:2016 Type B (KPT) and EN 374-5:2016. HS501 is 3.2 mil thick and HS502 is 4 mil, in sizes S, M, L and XL.
Thicker Karam disposable nitrile gloves with a long cuff for chemical splash work, stated to EN ISO 374-1:2016+A1:2018 Type B and EN 374-5:2016. HS503 is 6 mil with a 12 inch cuff (test letters KPT); HS504 is 8 mil and chlorinated inside for easier donning (test letters JKOPT); sizes S to XL.
Green Karam nitrile gloves for heavy duty mechanical and chemical protection, with grip in wet and dry conditions, stated to EN 388:2016, EN ISO 374-1:2016 Type A (AJKLPT) and EN 374-5:2016. Sizes M, L, XL and 3XL.
Light, reusable Frontier nitrile gloves from Karam for oil based chemicals and solvents, with an overlapping diamond pattern for wet and oily grip and a cotton flock lining. Stated to EN 388:2016, EN ISO 374-1:2016 Type A and EN ISO 374-5:2016 (virus); sizes L and XL.
Black Karam unsupported gloves with a thick neoprene and latex blend shell and a flocked liner, protecting against a wide range of acids, alkalis, alcohols and many solvents. Stated to EN 388:2016, EN ISO 374-1:2016 Type A (JKLNPT) and EN ISO 374-5:2016 (virus); sizes L and XL.
Blue and yellow Karam gloves double dipped with neoprene over natural rubber latex for protection against a broad range of chemicals, with a flocked liner that absorbs sweat. Stated to EN 388:2016, EN ISO 374-1:2016 Type A (AKLMNO) and EN ISO 374-4:2016; sizes L and XL.
Brown Karam gauntlet gloves with a multi layer PVC coating on a cotton interlock liner, for wide chemical protection, including acids and hydrocarbons, along with mechanical protection. Stated to EN 388:2016+A1:2018, EN ISO 374-1:2016+A1:2018 Type A (AKLMPST) and EN ISO 374-5:2016; size L.
Orange Frontier household gloves from Karam in 22 mil natural latex, with a fish scale grip pattern, cotton flock lining and a rolled cuff. No test standard is listed for them; sizes L and XL.
Green Frontier gloves from Karam with a 10 gauge cotton composite shell and a crinkle latex palm that grips in dry and wet conditions, stated to EN 388:2016. Open back and elasticated wrist; sizes M and L.
Lint free Frontier gloves from Karam with a polyurethane palm on a seamless 13 gauge polyester shell, stated to EN 388:2016. FT404 is white, FT405 black and FT406 grey; sizes M and L.
Light, durable Frontier gloves from Karam with a nitrile palm on a 13 gauge polyester shell, gripping in dry and slightly oily work, stated to EN 388:2016. FT408 is grey and FT409 black; sizes M and L.
Grey Frontier gloves from Karam with a 13 gauge high strength nylon, glass and spandex (HSN) shell rated cut level C by the ISO 13997 (TDM) test, and a PU palm. Stated to EN 388:2016, with a close, second skin fit for small parts; sizes M and L.
Blue heavy duty Frontier gloves from Karam, fully coated in nitrile over a cotton jersey cut and sewn liner with a safety cuff, forming a barrier to grease and oil. Stated to EN 388:2016; size L.
Green Frontier gloves from Karam, double dipped in PVC over a cotton interlock liner, protecting against abrasion and mild acids and alkalis, with a rough finish for grip in greasy work. Stated to EN 388:2016; size L, in 12, 14, 16 and 18 inch lengths.
Yellow Frontier gloves from Karam, single dipped in PVC over a cotton interlock liner, giving abrasion and mild acid and alkali protection up to the forearm. Stated to EN 388:2016; size L, in 12 and 14 inch lengths.
Sizes: 7 Gauge, 10 Gauge
Seamless Frontier cotton knitted gloves from Karam for light handling, ambidextrous with a knit wrist and hem; no test standard is listed. Sold as FT601, FT602, FT603, FT611, FT613 and FT615 in 7 or 10 gauge, 40 to 90 grams, in natural white, navy blue or grey melange.
Frontier cotton knitted gloves from Karam with blue PVC dots for extra grip, dotted on one side (SD versions) or on both sides (DD versions). Sold as FT604, FT605, FT606, FT612, FT614 and FT616 in 7 or 10 gauge, 40 to 90 grams, in natural white, navy blue or grey melange.
Frontier arm sleeves from Karam in double ply seamless cotton knit, 14 inch long in a universal size, for light protection of the arms from minor scrapes and abrasion. FT701 is natural white and FT703 grey melange; both can be washed and reused.
Sizes: 22” & 24”
Long, unlined grey split leather sleeves from Karam's Frontier range that cover the full arm against sparks and metal splatter, with heat resistance up to 100°C for 15 seconds. Stated to EN 388:2016 and EN 407:2020; in 22 and 24 inch lengths.
Sizes: 14”
Grey split leather gloves from Karam's Frontier range with a wing thumb, gunn cut and gauntlet cuff, and heat resistance up to 100°C for 15 seconds. Stated to EN 388:2016 and EN 407:2020; 14 inch long.
Sizes: 14”
Cotton lined split leather gauntlets from Karam's Frontier range, 14 inch (35 cm) long, with heat resistance up to 100°C for 15 seconds, stated to EN ISO 21420, EN 388:2016+A1:2018, EN 407:2020 and EN 12477 for welders' gloves. FT811(RD)(14) is red and meant for arc welding; FT811(P)(GY)(14) is grey with welted joints, also offered without them as FT811(GY)(14).
Sizes: 16”
Green and yellow split leather gauntlets from Karam's Frontier range, 16 inch (40 cm) long and fully cotton lined, with welted joints, a reinforced thumb and heat resistance up to 100°C for 15 seconds. Stated to EN ISO 21420:2020+A1:2024, EN 388:2016+A1:2018, EN 407:2020 and EN 12477:2001+A1:2005.
Sizes: 16"
Heavy duty blue and yellow split leather welding gloves from Karam's Frontier range, with a double palm, para-aramid thread stitching, a cotton lining and heat resistance up to 350°C for 15 seconds. Stated to EN ISO 21420:2020+A1:2024, EN 388:2016+A1:2018, EN 407:2020 and EN 12477:2001+A1:2005; 16 inch long.
Sizes: 14”
Maroon and yellow cut and heat resistant gloves from Karam's Frontier range, with a para-aramid fabric palm, special split leather, a heat resistant woollen lining and heat resistance up to 250°C for 15 seconds. Stated to EN ISO 21420:2020+A1:2024, EN 388:2016+A1:2018, EN 407:2020 and EN 12477:2001+A1:2005; 14 inch long.
Sizes: 10.5”
Grey Frontier work gloves from Karam with a single split leather palm, cotton drill back, jersey lining and a rubberised cuff, stated to EN 388:2016. 10.5 inch long.
Sizes: 10.5”
Grey and green Frontier work gloves from Karam with a double layer split leather palm for extra protection, cotton drill back, jersey lining and a rubberised cuff, stated to EN 388:2016. 10.5 inch long.
Sizes: 10”
Soft, unlined natural white grain leather gloves from Karam's Frontier range for driving and handling, with a wing thumb and shirred elastic wrist, stated to EN 388:2016. 10 inch long; FT842 adds a velcro wrist closure.
Sizes: 18 and 22 inches
Yellow Karam forearm sleeves knitted two ply from 100% genuine Kevlar fibre, light and non irritating, with a thumb hole, against cut and contact heat. Stated to EN 388:2016 and EN 407:2020; in 18 and 22 inch lengths.
Sizes: 18
Blue Karam arm sleeves knitted seamless from HPPE and glass fibre, rated TDM cut level C, light and comfortable to work in, stated to EN 388:2016. 18 inch long, as HS702(18) or HS702(18)TH with a thumb hole.
Sizes: 18 and 22
Karam forearm sleeves knitted two ply from 100% para-aramid yarn for cut and heat resistance, with a thumb hole that holds them in position. Stated to EN 388:2016 and EN 407:2020; yellow (HS703) or black (HS704), in 18 and 22 inch lengths.
Start with the hazard. EN 388 is the European standard for gloves against mechanical risks such as abrasion, cut, tear and puncture, and most Karam gloves here are stated to it. Under EN 388:2016, cut resistance is also graded by the ISO 13997 (TDM) test as a letter from A to F, with F the highest. Karam lists level B for HS46, level C for HS53, FT501 and the HS702 sleeves, level D for HS65DD and level F for HS82; the ANSI A numbers (A2, A3, A6) are the American cut scale, where a higher number also means more cut resistance. When cut is the main risk, pick a liner of HPPE (high performance polyethylene), glass fibre, steel or para-aramid such as Kevlar.
Then pick the coating for the grip you need. Crinkle latex grips rough, dry or wet items such as bricks and tiles; thin PU (polyurethane) keeps a close feel for assembly and inspection, and some Karam PU gloves are low lint for electronics and pharma work; nitrile holds its grip on oily parts, and the nitrile sponge, micro foam and sandy finishes are made for wet or oily handling. A palm coating with an open back keeps hands cooler, while fully coated gloves keep oil and liquid off the whole hand. Gauge is the fineness of the knit: 13 and 15 gauge liners are thin for fingertip feel, 7 and 10 gauge are thicker.
For chemicals, look for EN ISO 374-1. Type A is the stronger rating, passed against more of the standard test chemicals than Type B, and the letters after it (for example AJKLPT) are the codes of the chemicals tested. EN ISO 374-5 covers micro-organisms, with VIRUS shown where the virus test is also passed, and EN ISO 374-4 covers degradation by chemicals. Karam's Type A gloves here are HS151, FT551, HS161, HS171 and HS202(16); the HS501 to HS504 disposable nitrile gloves are Type B, in 3.2, 4, 6 and 8 mil thickness (a mil is a thousandth of an inch). The FT452 and FT453 PVC gloves protect against mild acids and alkalis as Karam states, and the FT552 household gloves have no standard listed.
For heat and welding, EN 407 covers thermal risks and EN 12477 is the standard for welders' gloves. Karam's Frontier split leather gloves and sleeves are rated for heat up to 100°C for 15 seconds, the FT822(P) for 250°C and the double palm FT821(P)(BE/YW) for 350°C, each for 15 seconds. Knitted Kevlar and para-aramid gloves and sleeves give cut and contact heat protection without leather. Sizes run from XS to 3XL depending on the model; prices are on request, so call or WhatsApp +91 92440 89060 with your size mix.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
