Zoloto Bronze Horizontal Check Valve No.5, Heavy Pattern, Screwed (1011)

Zoloto Bronze Vertical Check Valve, Spring Loaded, Screwed (1009)

Sizes: 15 mm to 100 mm

Single piece bronze check valve for vertical lines, spring loaded with an O ring seal, with female threaded ends from 15 mm to 100 mm.

Zoloto Forged Brass Multi Utility Check Valve, Screwed (1009A)

Sizes: 15 mm to 50 mm

Chrome finished forged brass check valve that can be fitted in horizontal or vertical lines, with a screwed in bonnet and female threads, 15 mm to 50 mm.

Zoloto Bronze Horizontal Lift Check Valve, Medium Pattern, Screwed (1010)

Sizes: 8 mm to 100 mm

Medium pattern bronze lift check valve for horizontal lines, with a mushroom shaped metal disc and female threaded ends, 8 mm to 100 mm.

Zoloto Bronze Angle Lift Check Valve, Screwed (1010A)

Sizes: 15 mm to 50 mm

Angle pattern bronze lift check valve, with inlet and outlet at right angles, for turning a line through a corner. Medium pattern, 15 mm to 50 mm.

Zoloto Bronze Horizontal Check Valve No.8, Flanged (1012)

Sizes: 15 mm to 50 mm

Medium pattern bronze lift check valve (No.8) for horizontal lines, flanged to BS 10 Table D, 15 mm to 50 mm.

Zoloto Bronze Horizontal Check Valve No.9, SS 410 Trim, Screwed (1013)

Sizes: 8 mm to 100 mm

Bronze lift check valve (No.9) with renewable 13% chrome stainless steel (SS 410) working parts, rated for steam at 10.55 kg/cm²g (150 psig) and up to 225°C. Screwed, 8 mm to 100 mm.

Sant Valves DP-1A Dual Plate Wafer Check Valve, Cast Iron, SS Plates, PN-16

Sizes: 50 mm to 400 mm

Spring loaded dual plate check valve with a cast iron body and SS 304 plates, clamped between ASME B 16.5 Class-150 flanges. PN-16, 50 mm to 400 mm.

Sant Valves DH87X Double Door Check Valve, Grooved

Sizes: 219.1 mm, 273 mm, 323.9 mm, 377 mm

Double door check valve with grooved ends to ISO 6182 in a ductile iron body, for grooved water pipework. PN16, in sizes from 219.1 mm to 377 mm.

Kartar Valves CI Swing Non Return Valve, PN 1.0, IS 5312 (K514, K515)

Cast iron swing type non return valve with flanged ends drilled to IS 1538 and an SS AISI 410 hinge pin, made to IS 5312 (Part-1) in PN 1.0. Rubber seat (K514) or gunmetal seat (K515), 50 mm to 500 mm.

Kartar Valves DI Swing Non Return Valve, PN 1.6, Blue Epoxy, IS 5312 (K516, K517)

Ductile iron swing type non return valve with blue epoxy paint, flanged ends drilled to IS 1538 and an SS AISI 410 hinge pin, made to IS 5312 (Part-1) in PN 1.6. Rubber seat (K516) or gunmetal seat (K517), 50 mm to 500 mm.

HD Fire Swing Check Valve, Ductile Iron, UL Listed and FM Approved

A swing check valve that lets water flow one way only, opening when flow pressure exceeds its cracking pressure and closing promptly when flow stops or reverses, to protect the system from back flow and pressure surges. It is UL Listed and FM Approved.