Apollo Intelligent Manual Call Point, Red, with Isolator
An addressable manual call point for raising the fire alarm by hand, with a resettable operating element and a built-in isolator. It works with XP95, Discovery and CoreProtocol.
Authorised distributor for ApolloApollo AlarmSense Manual Call Point
The manual call point for AlarmSense systems, certified to EN 54-11, with plug and play terminals for faster wiring.
- EN 54-11 certified
- Plug and play terminal connections
- Semi flush or surface mounting
- FG and CPR approvals, 10 year warranty
Standards and approvals: FG, CPR
Specifications
Specifications
| Specification | 55100-894APO |
|---|---|
| Warranty | 10 year |
| Colour | Red |
| Key type | KAC, Manal, Call, Point test & reset key |
Specifications as published by Apollo. Please confirm the exact model with us before ordering.
More Apollo Manual Call Points
Apollo Intelligent Manual Call Point, Green (Door Release)
A green addressable call point commonly used to release secure doors or barriers by hand in an emergency. It works with XP95, Discovery and CoreProtocol.
Apollo Discovery Manual Call Point, Isolating
A Discovery addressable call point with a built-in isolator that reports an alarm to the panel in under 0.2 seconds. It works on XP95 and Discovery loops.
Apollo Discovery Manual Call Point
The non-isolating Discovery addressable call point, reporting an alarm in under 0.2 seconds on XP95 and Discovery loops.
Apollo Discovery Manual Call Point, Outdoor
A weatherproof Discovery call point for outdoor use on XP95 and Discovery loops, reporting an alarm in under 0.2 seconds.
Apollo XP95 Manual Call Point, Isolating
An XP95 addressable call point with a built-in isolator that reports an alarm in under 0.2 seconds, for XP95 and Discovery loops.
Manual Call Points from other brands
Notifier
Notifier NBG-12LX Addressable Dual-Action Pull Station
A dual-action pull station with a built-in addressable interface, for any Notifier intelligent panel except the FireWarden series and the NSP-25 panel.
Notifier
Notifier NOT-MCP-G-I Addressable Manual Call Point
A non-coded addressable call point that gives a Notifier intelligent panel one addressable alarm point. It works with all Notifier intelligent panels and runs automatically in FlashScan mode.
Morley by Honeywell
Morley by Honeywell HM-MCP-G-UL-I Addressable Break Glass Manual Call Point (Morley UL)
An addressable break glass call point for the Morley UL range, addressed with a rotary decade switch and tested with a specialist key that lowers the glass and releases the micro-switch.
System Sensor
System Sensor MCP2A Conventional Indoor Manual Call Point, Red (with or without Backbox)
A red conventional indoor call point with a plug and play terminal block, available without a backbox (MCP2A/R470FF/01) or with a backbox (MCP2A/R470SF/01). It can be set up as break glass or resettable by changing the element.
System Sensor
System Sensor MUS3A/Y000FF/11 Single-Pole Flexi-Element Manual Call Point, without Backbox
A single-pole flexi-element call point for flush mounting, with a plug and play terminal block and a choice of break glass or resettable operation.
Ceasefire
Ceasefire Intelli-Sense Addressable Manual Call Point (TI-002226 and TI-002431)
Single action push button call point for addressable loops, with a built-in short circuit isolator and a resettable operating element. Approved to EN 54-11 and EN 54-17 and certified by LPCB; TI-002431 is the new variant.