Fire Protection System (FPS) is a supplier of Aaag branch pipes and nozzles in Bhopal: ISI approved short branch pipes, handline nozzles with selectable or automatic flow, fog, triple action and diffuser nozzles, hose reel nozzles, and water curtain, revolving and piercing nozzles. We supply them with hoses and hydrant equipment across Madhya Pradesh.
Sizes: 63mm Male Instantaneous
A basic straight tip branch pipe used by most fire brigades, giving a concentrated jet with long reach. ISI approved, in gunmetal, with stainless steel or aluminium alloy as options.
Sizes: 63mm Male Instantaneous
The stainless steel version of Aaag's ISI approved short branch pipe, with interchangeable smooth bore tips for a concentrated jet. Aluminium alloy is also offered.
Sizes: 63mm Male Instantaneous
A long straight tip branch pipe for fire brigade use, giving a concentrated jet with long reach. Aaag lists it as a copper branch pipe, with gunmetal, stainless steel or aluminium alloy material options in its table.
Sizes: 63mm Male Instantaneous
A branch pipe with a shut off control, used mostly by industrial and municipal fire brigades, made to IS 952. It gives a concentrated jet or a curtain type spray.
A general purpose nozzle for fire brigades that gives a hollow jet, a strong spray or shut off by twisting the bumper. Made to IS 2871 and listed by Aaag as ISI certified, rated 500 LPM at 7 bar.
The stainless steel triple action nozzle, giving a hollow jet, spray or shut off, made to IS 2871 and listed by Aaag as ISI certified, rated 500 LPM at 7 bar.
A nozzle that switches between a solid jet and a dense fog of fine droplets, which absorb heat and turn to steam. Made to IS 952, rated 500 LPM as a solid jet and 225 LPM as dense fog; Aaag shows it on a gunmetal page and a stainless steel page under the same code.
A constant flow jet and spray nozzle made to IS 2871, used on ships, by marine and coast guard services and offshore, rated 500 LPM at 7 bar. Choose a 63 mm male instantaneous inlet (G117), a Nunan inlet (G1171) or a 1.25 inch female BSP screwed inlet (G1170).
A low velocity fog nozzle for fighting fires in spaces on ships where entry is restricted, also used to give fire fighters a heat shield. It gives a dense fog 4.5 m wide at 225 LPM.
A handline nozzle in chromium plated gunmetal on which the flow can be changed by hand during use, adjustable from straight stream to fog and to shut off.
The combo version of the Select-O-Flow nozzle, combining chromium plated gunmetal and anodised aluminium alloy, with the same five selectable flows and jet, fog and shut off settings.
An anodised aluminium handline nozzle with five flow settings from 200 to 600 LPM, chosen by hand during use, and jet, fog and shut off.
A handline nozzle with one fixed flow, calibrated between 160 and 600 LPM to your requirement. A toothed bumper makes stream selection easy with gloves on and gives a fuller fog.
An anodised aluminium handline nozzle whose adjustable outlet keeps the pressure fairly constant across a range of flows, so the reach holds up even as the flow varies. Rated 500 LPM at 7 bar.
A hose reel nozzle that gives a strong, concentrated solid jet, listed as G126A (gunmetal) and G126C (stainless steel), for hoses with a 19 mm or 25 mm serrated inlet.
A metal hose reel nozzle that gives a concentrated jet or a wide angle spray and can be shut off, for 19 mm or 25 mm hose.
An ABS plastic hose reel nozzle in natural red with jet, spray and shut off, for 19 mm or 25 mm hose.
A nozzle that throws a flat curtain of water upward to separate one area from another. Gunmetal adaptor with a black painted MS deflector plate, rated 500 LPM at 7 bar.
A large water curtain nozzle in SS 304 that cools nearby areas and structures against flame spread and protects them from the radiant heat of a fire close by. It throws a curtain at least 6 m high and 18 m wide.
A nozzle with small revolving heads that send jets in many directions, upward and downward, to spread water into hard to reach places. Also used to protect the top of fixed roof fuel storage tanks.
A puncturing nozzle driven through a wall, ceiling or car bonnet to spray water into the closed space behind it, where the water turns to steam and cools the fire. SS 304, rated 900 LPM at 7 bar.
A smooth bore straight tip in gunmetal that screws onto a matching play pipe for a concentrated jet with long reach, offered in several bore sizes.
A gunmetal flat spray tip for Aaag 63 mm short and long play pipes, giving a concentrated flat pattern of water.
Sizes: 500LPM @ 7 Bar
A gunmetal oil fire tip for Aaag 63 mm short and long play pipes that gives a narrow angle conical spray, rated 500 LPM at 7 bar.
A galvanised mild steel spanner for changing nozzle tips on short or long play pipes, made for Aaag 63 mm nozzle tips with IS 903 as the reference standard.
A branch pipe fits on the end of the fire hose and shapes the water into a jet. Aaag's short branch pipes (G112 in gunmetal, S112 in stainless steel) are ISI approved and take interchangeable smooth bore tips of 6, 12, 16, 20 or 25 mm. The long branch pipe (G111) and the hand controlled branch pipe (G113, to IS 952), which adds a shut off, take the same tips. All three have a 63 mm male instantaneous inlet (screw thread optional), a 7 bar working pressure and a 21 bar test pressure.
Handline nozzles give jet, spray and shut off from one nozzle, with a toothed bumper for a fuller fog. On the Select-O-Flow (G118 in chromium plated gunmetal, and the C118 combo) the operator picks 150, 225, 350, 450 or 600 LPM at 7 bar during use, and the aluminium Select-O-Max 600 (A125) offers 200 to 600 LPM in five steps; both reach 35 m. The Unilite (A119) has one fixed flow, calibrated between 160 and 600 LPM as required, and the Automax 500 (A124) adjusts its outlet by itself to hold a steady pressure, at 500 LPM and a 34 m range.
For general fire fighting, the triple action nozzle (G116 gunmetal, S116 stainless steel, to IS 2871) gives a hollow jet, a spray or shut off with a twist of the bumper, and the fog nozzle (G114, to IS 952) switches between a 500 LPM solid jet and a 225 LPM dense fog. Diffuser (navy type) nozzles to IS 2871 are used on ships and offshore, with an instantaneous, Nunan or 1.25 inch BSP screwed inlet, and the fog applicator gives a 4.5 m wide low velocity fog for spaces on ships where entry is restricted.
First aid hose reels need a small nozzle with a 19 mm or 25 mm serrated inlet: Aaag offers jet action nozzles in gunmetal or stainless steel (G126A, G126C) and jet and spray nozzles in metal (G126B) or ABS plastic (P126B), giving 27 LPM (19 mm) or 32 LPM (25 mm) at 3 bar. Special nozzles include water curtain nozzles (G120 at 500 LPM, and the stainless steel Jumbo Curtain at 900 LPM), a revolving nozzle (G115, to IS 906), a piercing nozzle (S128) and flat spray, jet and oil fire tips for play pipes, changed with the galvanised nozzle spanner.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
