Fire Protection System (FPS), a Delta Plus supplier in Bhopal, supplies Delta Plus work gloves for mechanical risks across Madhya Pradesh: PU, latex and nitrile coated knitted gloves, an ESD glove, nitrile on jersey gloves, leather gloves and the NYSOS VV904 anti-vibration glove, all stated to EN 388. Prices are on request.
Seamless knitted 100% polyamide gloves at gauge 13 with a polyurethane coating on the palm and fingertips, for precision work in dry conditions. White (VE702) or grey (VE702GR) for soiled parts, rated EN 388 3121X.
Knitted 100% polyester gloves at gauge 13 with a polyurethane coating on the palm and fingertips for precision work in dry conditions, in grey (VE702PG), white (VE702P) or black (VE702PN). Rated EN 388 3121X.
Knitted 100% polyester gloves at gauge 13 with a latex coating on the palm and fingertips, rated EN 388 2131X, for general handling in dry conditions.
Carbon polyester gloves at gauge 13 with a polyurethane coating on the palm and fingertips, for areas with an electrostatic discharge hazard. Stated to EN 16350 for electrostatic properties and EN 388 3121A.
Knitted 100% polyester gloves at gauge 13 with a nitrile coating on the palm and fingertips for grip in oily or greasy conditions. Rated EN 388 3121X and ISO 18889 GR; also on a header card as DPVE712GR.
Knitted 100% polyester gloves at gauge 13 with a foam nitrile coating on the palm and fingertips for oily or wet handling, rated EN 388 4121X with abrasion level 4.
Fine gauge 15 polyamide and spandex gloves with a nitrile and polyurethane coating on the palm and fingertips, combining oil resistance with flexibility. Rated EN 388 3121X.
Full grain cowhide leather gloves in the American assembly pattern, rated EN 388 3122X, for handling in dry conditions. Also on a header card as DPFBN49.
Leather gloves with a cowhide grain leather palm and full index finger and a cowhide split leather back, in the American assembly pattern, rated EN 388 2121X.
Knitted 100% polyester gloves at gauge 13 with an embossed PURE latex coating on the palm and fingertips for grip in wet or dry conditions. Rated EN 388 2141A and EN 407 contact heat level 2; sold on a header card as DPVE733VE.
Nitrile gloves on a cotton jersey lining with a knitted wrist and a ventilated back, for oily and greasy work. Rated EN 388 3111X.
Nitrile gloves on a cotton jersey lining, fully coated so the back of the hand is covered too, with a knitted wrist, for oily and greasy work. Rated EN 388 3111X, size 10.
Nitrile gloves on a cotton jersey lining with a 6 cm canvas safety cuff and a ventilated back, for oily and greasy work. Rated EN 388 3111X, size 10.
Fully coated nitrile gloves on a cotton jersey lining with a 6 cm canvas safety cuff, covering the back of the hand for oily and greasy work. Rated EN 388 3111X.
Heavy duty polyester gloves at gauge 7 with rubber pads 0.8 cm thick on the palm and fingertips and a TPR back reinforcement. Stated to EN ISO 10819 for vibration and EN 388 4242XP with impact protection; sold on a header card.
Start with the conditions. For dry work, the PU coated VE702 (seamless polyamide) and VE702P (polyester) keep fingertip feel for precision jobs, and the VE630 has a latex coating. For oily or wet work, nitrile grips and resists oil: VE712GR, the foam nitrile VE722, the nitrile and polyurethane VE726 on a fine gauge 15 knit, and the nitrile on cotton jersey NI series. For wet handling, the embossed latex VE733 grips wet or dry objects.
Then read the EN 388 code: the four digits are abrasion (0 to 4), coupe cut (1 to 5, or X), tear (0 to 4) and puncture (0 to 4), followed by a TDM cut letter (A to F, or X when not tested) and P if the glove passed the impact test. These gloves are made for general handling rather than cut risk; for cut work, see the Delta Plus cut resistant gloves.
For the NI series, choose a knitted wrist (NI150, NI155) or a 6 cm canvas safety cuff (NI170, NI175), and a ventilated back (NI150, NI170) for breathability or full coating (NI155, NI175) to cover the back of the hand. For special needs, the VE702PESD is stated to EN 16350 for electrostatic properties, the VE712GR also to ISO 18889 GR, and the NYSOS VV904 to EN ISO 10819 for vibration, with P impact protection. Prices are on request: call or WhatsApp +91 92440 89060.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
