Fire Protection System (FPS) is a supplier of Delta Plus thermal protection gloves in Bhopal and across Madhya Pradesh: leather welding gloves to EN 12477 Type A, aramid and Kevlar gloves for hot parts, and a lined glove for cold work. Prices are on request.
A glove for cold, damp outdoor and cold store work: a brushed acrylic inner knit with a polyamide outer knit, fully coated in smooth waterproof latex and then given a foam latex layer on the palm and fingertips for grip. The maker rates it for cold environments down to -30°C.
A heavy welding glove with a heat resistant cowhide split leather palm and an aluminised Kevlar Preox back that reflects radiant heat. Wool fleece lining, Kevlar stitching and a 20 cm cuff, 40 cm long overall.
A 40 cm welding glove in THT treated heat resistant cowhide split leather, which the maker describes as self extinguishing and less reactive to flame. The palm has a wool fleece lining and the 20 cm cuff is lined with canvas.
A thick cowhide split leather welding glove for heavy duty tasks, 35 cm long with a 15 cm cuff that protects the forearm from flame, heat and large splashes of molten metal.
A red heat resistant split leather welding glove, 35 cm long, with a canvas lined cuff and Kevlar stitching, for protection against flame, heat and large splashes of molten metal.
A layered aramid glove with a cotton inner layer for handling very hot objects, with double insulation and a 16 cm aramid cuff, 36 cm long. The maker states protection against contact heat up to 250°C for 1 minute and up to 500°C for 30 seconds.
A gauge 7 Kevlar knit glove with a cotton lining that balances heat and cut resistance with finger feel. It is all textile, ambidextrous and washable, with a 10 cm ribbed cuff.
For welding, all five Delta Plus leather welding gloves here are stated to EN 12477 Type A, the welders' glove class with more protection and less finger dexterity, as opposed to Type B gloves, which give more dexterity for fine work such as TIG welding. Then choose the length and build: TERK400 and TER250 are 40 cm with a 20 cm cuff, while TC716 and CA615K are 35 cm. TERK400 adds an aluminised Kevlar Preox back and scores level 4 for radiant heat, and TER250 uses THT treated leather that the maker describes as self extinguishing.
For handling hot objects, read the six EN 407 digits in order: burning behaviour, contact heat, convective heat, radiant heat, small splashes of molten metal and large splashes of molten metal, each from 1 to 4, with X meaning not tested. TERK500 XTREM HEAT reaches level 4 for contact heat, and the maker states protection up to 250°C for 1 minute and up to 500°C for 30 seconds. KPG10 is a knitted Kevlar and cotton glove with contact heat level 2, chosen when finger feel matters more.
For cold work, THRYM VV736 has an acrylic inner lining and a double latex coating. Its EN 511 code reads convective cold, contact cold and water penetration, and the maker rates it for cold environments down to -30°C. Send FPS the job, the temperatures involved and the sizes needed, or call or WhatsApp +91 92440 89060 for prices.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
