Delta Plus MIAMI S1P SRC Safety Shoes
A light textile safety shoe with a polyester and cotton upper and a single density PU sole that flexes easily, for indoor manufacturing work. The listing also covers the khaki MIAMI S1P CAMO SRC.
Supplier for Delta Plus
Delta Plus Safety Shoes and Boots in Bhopal
Fire Protection System (FPS) is a supplier of Delta Plus safety footwear in Bhopal and across Madhya Pradesh: S1, S1P, S2 and S3 shoes with SRC slip resistant soles, ESD shoes for electronics, a welders' shoe, a washable food industry shoe and fur lined cold weather models. Prices are on request.
Where to use Safety Shoes and Boots
- Manufacturing and assembly lines
- Electronics assembly and ESD protected areas (ESD models)
- Steel plants, heavy engineering and workshops
- Welding and fabrication bays (COBRA4)
- Food processing units, dairies and kitchens (MIAMI S2 SRC)
- Utilities and maintenance work involving ladders
- Construction sites, roads and civil works
- Warehouses, logistics yards and loading bays
- Cold stores and cold outdoor work (CI models)
Delta Plus Safety Shoes and Boots models
Delta Plus TANGARA2 S1P SRC Safety Shoes
An airy S1P shoe for factory floors, with a ventilated suede split leather upper, an absorbent polyamide lining and a dual density PU outsole, in grey and yellow.
Delta Plus RIMINI4 S1P SRC Safety Shoes
A ventilated suede S1P safety shoe built like the TANGARA2, offered in beige and yellow or navy blue and orange, with a dual density PU sole for indoor manufacturing work.
Delta Plus FENNEC4 Safety Shoes, S1P or S1 SRC
A grey suede split leather safety shoe with a dual density PU sole, made in two protection classes: FENNEC4 S1P SRC with a penetration resistant midsole, and the lighter FENNEC4 S1 SRC without it.
Delta Plus SAULT2 S3 SRC ESD Safety Shoes
The ESD version of the SAULT2: a black S3 shoe in water resistant pigmented split leather, also tested to EN 61340 for electrostatic discharge control, with a dual density PU sole that wraps up over the toe as a bump cap.
Delta Plus MIAMI S1P SRC ESD Safety Shoes
The black textile MIAMI shoe in an ESD version tested to EN 61340, for electronics assembly and other areas where static discharge must be controlled.
Delta Plus MIWA S3 M SRC Safety Shoes with Metatarsal Protection
A heavy duty S3 shoe in 1.8 to 2 mm buffalo leather with a premoulded flap that protects the metatarsal bones on top of the foot. The dual density PU sole has angular studs, drain channels and side ladder grips.
Delta Plus SAGA S3 SRC Non Metallic Safety Shoes
A non metallic nubuck leather safety shoe with a cemented PU and rubber sole, listed both to EN ISO 20345 S3 HRO SRC and to the American standard ASTM F2413, in beige, black or brown.
Delta Plus BROOKLYN S3 SRC Non Metallic Safety Shoes
A non metallic cowhide suede shoe with a rubber toe reinforcement, a reinforced heel section with anti slip lining for heel hold, and a phylon and rubber sole. The name says S3 but the catalogue table reads S1P HRO SRC, so confirm the class before ordering.
Delta Plus COBRA4 S3 SRC Welders' Safety Shoes
A black safety shoe designed for welding in any sector, with para aramid seams, a velcro fastened flap over the front and two inner elastics for a closer fit. The maker lists it to EN ISO 20345 S3 M SRC and cites EN ISO 20349-2:2017 with the WG welders' marking.
Delta Plus MIAMI S2 SRC Washable Food Industry Shoes
A food industry safety shoe with a water resistant microfibre and PU upper that can be machine washed at up to 30°C, in white or black. It is S2, so it has a water resistant upper but no penetration resistant midsole.
Delta Plus PHOENIX S3 SRC Safety Shoes with Fast Lacing
A non metallic S3 shoe for utilities and maintenance teams, with a fast lacing system and a dual density PU sole that has a flex zone, the V STAB system against foot twisting and side grips for ladders.
Delta Plus PHOCEA S3 SRC Safety Shoes with Fast Lacing
A companion to the PHOENIX with the same specification in the catalogue: non metallic, fast lacing, water resistant pigmented split leather and the V STAB dual density PU sole. It is listed at 570 g against 590 g for the PHOENIX; ask FPS for photos to compare the two styles.
Delta Plus AURIBEAU3 S1P SRC Safety Shoes
A green and black non metallic S1P shoe with a split suede and mesh upper for breathability, on a dual density PU sole with flex zone, V STAB torsion control and ladder grips that holds on indoor and outdoor surfaces.
Delta Plus PERTUIS3 S1P SRC Safety Shoes
A sister model to the AURIBEAU3 with the same suede and mesh upper and V STAB dual density PU sole, also non metallic and in green and black. The catalogue lists it at 622 g against 640 g for the AURIBEAU3.
Delta Plus GOBI S3 SRC Construction Safety Shoes
A brown leather construction shoe with a stainless steel anti puncture insert, a breathable 3D mesh lining and a shock absorbing heel. Seams are reinforced with rivets for rough outdoor use.
Delta Plus TAKU S3 CI SRC Cold Weather Safety Boots
A safety boot designed for the cold, with a polyester fur lining, a felt insole and a PU sole that the maker says keeps its properties down to -30°C. Grip handles help pull it on, and a stainless steel insert resists puncture.
Delta Plus ATACAMA S3 SRC Construction Safety Shoes
A brown leather construction model with a flex fold at the back of the upper for ankle comfort when bending, a breathable 3D mesh lining, a stainless steel anti puncture insert and a shock absorbing heel.
Delta Plus SANTANA S3 SRC Wide Fit Safety Shoes
A wide fitting (mondo 11) non metallic shoe in smooth buffalo leather with a shock absorbing dual density PU sole, a PU bumper over the toe and PANOFLEX bending zones that make walking easier through the day.
Delta Plus CALYPSO S3 SRC Wide Fit Safety Shoes
Part of the same wide fitting buffalo leather line as SANTANA and MAESTRO, with the cut resistant CR marking, a shock absorbing sole and a toe bumper. It is the heaviest of the three in the catalogue at 856 g.
Delta Plus MAESTRO S3 SRC Wide Fit Safety Shoes
A wide fitting smooth buffalo leather shoe with the CR cut resistant marking, PANOFLEX flex zones and a shock absorbing dual density PU sole, listed at 670 g, the lightest of the SANTANA, CALYPSO and MAESTRO line.
Delta Plus SAULT2 S3 SRC Safety Shoes
A black S3 construction shoe in water resistant pigmented split leather with retro reflective tapes for visibility, a shock absorbing dual density PU sole and a bumper over the toe.
Delta Plus MONTBRUN S3 SRC Safety Shoes
The partner model to the SAULT2, with the same reflective tapes, pigmented split leather upper and shock absorbing PU sole with toe bumper. The catalogue weight is 702 g against 736 g for the SAULT2.
Delta Plus JUMPER3 Safety Shoes, S3, S1P or S1 SRC
A black pigmented split leather safety shoe with a polyamide mesh lining and dual density PU sole, offered in three protection classes: JUMPER3 S3 SRC with water resistant leather, JUMPER3 S1P SRC and JUMPER3 S1 SRC.
Delta Plus JET3 Safety Shoes, S3, S1P or S1 SRC
The JET3 shares its construction with the JUMPER3: pigmented split leather, polyamide mesh lining and a dual density PU sole. It also comes as JET3 S3 SRC, JET3 S1P SRC and JET3 S1 SRC.
Delta Plus JUMPER3 S3 FUR HC SRC Cold Insulated Safety Shoes
A fur lined version of the JUMPER3 with a felt insole and a PU sole formula that keeps its properties down to -30°C, carrying the CI cold insulation marking. Listed at 776 g.
Delta Plus JUMPER3 S3 FUR SRC Cold Insulated Safety Shoes
A second fur lined JUMPER3 with the same water resistant split leather, felt insole and cold insulated sole as the HC model, listed at 611 g.
Delta Plus CADEROUSSE S3 SRC Fur Lined Wide Fit Safety Shoes
A full grain leather, wide fitting (mondo 11) model for cold weather, with a polyester fur lining and felt insock, retro reflective tapes and a shock absorbing dual density PU sole with toe bumper. The catalogue lists it as S3 CI SRC.
How to choose
Start with the protection class in EN ISO 20345, the European standard for safety footwear with a toe cap. S1 adds a closed heel, antistatic properties and heel energy absorption. S1P is S1 plus a penetration resistant midsole against nails. S2 is S1 plus an upper that resists water, and S3 combines the water resistant upper with the penetration resistant midsole and a cleated sole. Most Delta Plus shoes here are S3 or S1P; FENNEC4, JUMPER3 and JET3 are also offered as S1.
Then read the extra letters. SRC means the sole passed slip tests on both ceramic tile and steel floors. HRO is a heat resistant outsole, CI means the sole is insulated against cold, M adds metatarsal protection over the top of the foot, and CR means a cut resistant upper. ESD models are also tested to EN 61340 for electronics areas, and COBRA4 carries the welders' footwear marking WG. Several models are non metallic, and GOBI, TAKU and ATACAMA use a stainless steel anti puncture insert.
Finally match the fit and the site. Textile MIAMI shoes and the ventilated suede TANGARA2 and RIMINI4 suit indoor manufacturing, the MIAMI S2 SRC washes in a machine for food plants, and SANTANA, CALYPSO, MAESTRO and CADEROUSSE are wide fitting (mondo 11) with a shock absorbing sole. Sizes start at 35, 36 or 39 and go up to 47 or 48 depending on the model.
Send FPS the work area, the class you need and your size list, and we will suggest matching Delta Plus models. Call or WhatsApp +91 92440 89060 for prices.
Frequently asked questions
What is the difference between S1P and S3 safety shoes?
Both have a toe cap and a penetration resistant midsole under EN ISO 20345. S3 adds an upper that resists water and a cleated sole, so it suits outdoor and wet sites, while S1P suits dry indoor work.
What does SRC mean on Delta Plus shoes?
SRC is the slip resistance marking under EN ISO 20345. It means the sole passed the slip test on a ceramic tile floor with detergent and on a steel floor with glycerine; every Delta Plus shoe listed here carries it.
Which Delta Plus shoes are made for electronics areas?
MIAMI S1P SRC ESD and SAULT2 S3 SRC ESD are also tested to EN 61340, which covers control of electrostatic discharge where sensitive electronics are handled.
Is there a Delta Plus shoe for welders?
Yes, COBRA4 S3 SRC. The maker cites EN ISO 20349-2:2017 with the WG welders' marking, and it has para aramid seams, a velcro fastened flap and metatarsal protection.
Which models are made for cold conditions?
TAKU S3 CI SRC, CADEROUSSE S3 SRC and the two JUMPER3 S3 FUR models carry the CI cold insulation marking and have fur linings. Delta Plus states that the TAKU and JUMPER3 FUR soles keep their properties down to -30°C.
Where can I buy Delta Plus safety shoes in Bhopal?
FPS is a Delta Plus supplier and supplies this footwear in Bhopal and across Madhya Pradesh. Prices are on request: call or WhatsApp +91 92440 89060 with the models and your size list.