FPS is an authorised Minimax distributor in Bhopal for single and double headed hydrant valves made to IS:5290-1993, collecting breaching heads for fire brigade inlet, and draw off connections. The hydrant valves are ISI marked, have 63 mm instantaneous outlets and come in gunmetal, stainless steel or aluminium.
Single headed oblique hydrant valve with an 80 mm flat faced flanged inlet and a 63 mm female instantaneous outlet, made to IS:5290-1993 Type A and ISI marked. It is flow tested at 900 LPM at 7 kg/cm2.
Double headed oblique hydrant valve with a 100 mm flat faced flanged inlet and 63 mm female instantaneous outlets, made to IS:5290-1993 Type B and ISI marked. It is flow tested at 1800 LPM at 7 kg/cm2.
Sizes: 2 Way, 3 Way, 4 Way
Fire brigade inlet connection with 63 mm male instantaneous inlets to IS:903, each with a built-in check valve, and a flanged outlet. Offered in 2-way, 3-way and 4-way versions.
Draw off connection for firefighting systems with a gunmetal body, a 100 mm inlet and an 80 mm flat faced flanged outlet. It is hydraulically tested at 21 kgf/sq.cm for 150 seconds.
A hydrant valve, also called a landing valve, is the outlet on a hydrant main where the fire hose is connected. Minimax makes single headed and double headed oblique types to IS:5290-1993, both ISI marked, with 63 mm female instantaneous outlets with lugs, hand wheel operation and a rising stem. The single headed valve (Type A) has an 80 mm flanged inlet and is flow tested at 900 LPM; the double headed valve (Type B) has a 100 mm flanged inlet and is flow tested at 1800 LPM, both at 7 kg/cm2.
Both valves are offered in gunmetal (GM), stainless steel (SS) or aluminium (AL), hydraulically tested at 21 kgf/sq.cm and checked for water tightness at 14 kgf/sq.cm, each for 150 seconds, and supplied with an ABS blank cap. Choose the double headed valve where two hose lines need to be run from one point.
A collecting breaching head is the fire brigade connection, through which fire service pumps can feed water into the system. The Minimax unit has 63 mm male instantaneous inlets to IS:903 with built-in check valves, a flanged outlet (4 inch NB on the 2-way version) and a gunmetal stop valve, in 2-way, 3-way and 4-way versions. The draw off connection has a gunmetal body, a 100 mm inlet and an 80 mm flat faced flanged outlet, hydraulically tested at 21 kgf/sq.cm for 150 seconds. FPS supplies, installs and tests all of these in Bhopal and across Madhya Pradesh.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
