Authorised distributor for ApolloAn addressable optical smoke detector using Apollo's PureLight sensing technology for false alarm management and reliability, suited to slow burning, smouldering fires.
Standards and approvals: EN 54-7, EN 54-17, SBSC, BOSEC, FG, LPCB, VdS, CPR
| Specification | SA5100-600APO |
|---|---|
| Warranty | 10 year |
| Applications | Bedrooms, Cafes, Escape routes, Hotels, Restaurants, RetailB&Bs/guest houses, Offices, University campuses |
| Fire Type | Slow burning, smouldering fires |
| Colour | White |
| Finish | Gloss |
| Sensor configuration | Chamber with surface-mount infrared emmiter and prism., Solid state integrated photo-diode and amplifier. |
| Weight | 95g |
| Materials housing | Polycarbonate |
| Materials terminals | Tin plated stainless steel |
| Product diameter | 100mm | 3.94in |
| Detection principle | Photo-electric light scattering. |
| Analogue value nominal | 23 |
| Analogue value (- tolerance) | 0 |
| Analogue value (+ tolerance) | 4 |
| Analogue value | 23 +4/-0 |
| Alarm level analogue value | 55 |
| Chamber type | Pure, Light |
| Protocol voltage | 5 to 13V peak to peak |
| Protocol voltage (max) | 13V |
| Protocol voltage (min) | 5V |
| Power-up surge current | 0.56mA |
| Status indicator: Alarm | Red |
| Status indicator: Fault | Flashing yellow |
| Quiescent current | 350μA |
| Quiescent current tested at | 24V dc |
| Terminal functions L2 | +L2, Loop in & out positive |
| Terminal functions L1 in | -L1 in, Loop (isolated) negative |
| Terminal functions L2 out | -L1 out, Loop (isolated) negative |
| Terminal functions +R | +R, Remote indicator positive connection |
| Terminal functions -R | -R, Remote indicator negative connection |
| Polarity | L1 &, L2 are polarity sensitive |
| Status indicator: Isolate | Yellow |
| Status indicator: Poll | Green |
| Sampling frequency | Once per second |
| Humidity (max) | 95%, RH |
| Humidity (min) | 0%, RH |
| Humidity Note | no condensation or icing |
| Humidity | 0% to 95% (no condensation or icing) |
| Operating temperature | -40 to 70°C | -40 to 158°F |
| Operating temperature (max) | 70°C | 158°F |
| Operating temperature (min) | -40°C | -40°F |
| IP rating Value | IP44 |
| Effect of wind speed | None |
| Wind speed test | Tested up to 10m/s |
Specifications as published by Apollo. Please confirm the exact model with us before ordering.
An addressable detector that combines PureLight optical smoke sensing with two thermistors for heat, responding to fast and slow burning fires and offered as an alternative to ionisation detectors. It comes in white and in black.
An addressable multi-sensor with dual optical smoke sensing and a central heat thermistor, with five operating modes so it can be adapted to its environment.
An addressable detector with three methods of detection: dual optical smoke sensing, a central heat thermistor and a carbon monoxide (CO) sensor, for accurate smoke detection that discriminates against false alarm sources.
An addressable heat detector with two heat sensors placed laterally for accurate detection in all orientations, and eight response modes for a wide range of application temperatures.
A low profile, flush mounted optical smoke detector with no chamber, a design that sets it apart from standard detectors. It uses CoreProtocol and comes in white and in black.
A flush mounted optical smoke detector with a ruggedised metal face plate held by anti-tamper screws, independently certified to DHF TS001 for anti-ligature use in specialist areas.
A battery operated, Wi-Fi enabled photoelectric smoke detector from the IMPACT by Honeywell range. When smoke reaches its alarm threshold it sounds a buzzer, flashes an LED and sends real-time alerts to a smartphone through the IMPACT by Honeywell app.
A battery operated standalone smoke alarm with photoelectric sensing that sounds an alarm and lights a red LED when smoke reaches its threshold. It runs on two AA batteries and also warns of a low battery or a chamber fault.
An intelligent addressable photoelectric smoke detector with an optical chamber that senses smoke from a wide range of fires, and sensitivity that is programmable and monitored by the panel.
An intelligent photoelectric smoke detector with dual thermistors that add 135°F (57°C) fixed temperature heat sensing in the same head.
An S200A plug-in photoelectric smoke detector listed with the DXc and ZXSe panels. Its detection chamber is designed to cut false alarms from dust, insects and other debris.
An S200A multi-criteria detector that adds 58°C fixed temperature and rate of rise thermal sensing to a photoelectric smoke sensor, for better false alarm immunity and faster response to a wide range of fires.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
