Ravel 2 Zone Agent Release Panel
A microprocessor based 2 zone panel that detects a fire and releases a gaseous agent, with main and standby cylinder output and several release options.
Dealer for RavelRavel Emergency Release and Abort Call Points, Green and Yellow
Plastic call points for agent release systems: green for manual emergency release and yellow for abort.
- Green version for emergency release, yellow version for abort
- Red LED shows alarm status
- Operates on 24 V DC
- Plastic housing, IP50
- One CO and NC output available as an option
Specifications
Specifications
| Specification | RE-716 MG |
|---|---|
| Operating Voltage | 24VDC |
| Operating Current | 30mA |
| Colour | Green / Yellow / Red |
| Material | Plastic |
| IP Rating | IP-50 |
| Size | 86 X 86 X 50 mm |
Specifications as published by Ravel. Please confirm the exact model with us before ordering.
More Ravel Agent Release Panels
Ravel 4 Zone Agent Release Panel with Two Release Circuits
A microprocessor based 4 zone agent release panel with two release circuits and solenoid coil monitoring, which Ravel states is UL listed.
Ravel 4 Zone Agent Release Panel, UL 864
A 4 zone agent release panel with separate LED indication for each release circuit, which Ravel states complies with UL 864 (10th edition) and NFPA 72.
Ravel Gas Release Repeater Panel
A repeater panel that shows all the parameters of the RE-120GR or RE-25AR agent release panel at a second location.
Ravel RS485 Interface Module for RE-25AR
An RS485 driver module for the RE-25AR agent release panel, allowing up to 32 transceivers on the serial bus.
Ravel Modbus Converter for RE-25AR
A converter that changes the RE-25AR panel's Ravel protocol to Modbus, for linking to SCADA, PLC or BMS systems.
Gas Release Control Panels from other brands
Ceasefire
Ceasefire 3 Zone Automatic Extinguishing Control Panel (TI-002341)
Conventional control panel for gas suppression, with 3 detection zones and 1 extinguishing zone that can drive solenoid or Metron actuators. A large LCD countdown timer shows the time to release.
Ceasefire
Ceasefire Manual Abort Switch (TI-002342)
Abort switch for extinguishing systems, compatible with the Rapid-Sense control panel and complying with BS 7273-1 requirements.
Siemens
Siemens XC361-ZA Cerberus PRO Fire and Extinguishing Control Panel, 1 Loop, C-NET
A compact XC360 series panel for one extinguishing sector, handling detection, evaluation and alarm for up to 126 addressable devices from the Cerberus FIT and Cerberus PRO ranges over C-NET.
Siemens
Siemens XC3610-AA Cerberus PRO Fire and Extinguishing Control Panel, 1 Loop, FDnet (Sinteso Devices)
The XC360 series single-sector panel for Sinteso peripherals over FDnet, with detection and alarm for up to 126 addressable devices on one loop.
Soft-Chip
Soft-Chip Microprocessor Gas Release Fire Alarm Panel
Microprocessor based panel that controls a gas flooding suppression system, with single or cross zone logic, a pre discharge warning and a 24 VDC gas release output. It includes programmable countdowns, manual abort and false release protection.