Fire Protection System (FPS), a Siemens dealer in Bhopal, supplies Siemens addressable smoke, heat, multi-sensor and fire and CO detectors from the Cerberus PRO, Cerberus FIT addressable and Sinteso ranges. FPS installs, commissions and maintains them across Madhya Pradesh.
A multi-sensor detector with one optical sensor and two heat sensors for flaming and smouldering fires in rooms with low to moderate deceptive phenomena; the OH731-S adds Smoke Entry Supervision.
A multi-criteria detector with 4 optical sensors and two heat sensors for rooms with deceptive phenomena, with ASAplus parameter sets; the OOH751-S adds Smoke Entry Supervision.
An FD720 addressable optical smoke detector on C-NET for smoke from flaming and smouldering fires, using forward light scattering.
An FD720 addressable smoke detector with an extra heat sensor for flaming and smouldering fires in rooms with deceptive phenomena.
An FD720 addressable heat detector with selectable fixed temperature and rate of rise parameter sets, for areas where smoke detection is impractical.
An FD720 addressable fixed temperature heat detector for areas with temporary high temperature variations, which signals the panel when its maximum temperature is exceeded.
A detector that analyses smoke, heat and carbon monoxide for very early alarm, made for places such as nursing homes and hospitals where speed of detection is critical.
A multi-sensor smoke detector with forward and backward scattering and two heat sensors, usable on C-NET or on collective lines.
A Cerberus FIT addressable optical smoke detector on C-NET for smoke from flaming and smouldering fires.
A Cerberus FIT addressable smoke detector with an extra heat sensor for rooms with deceptive phenomena.
A Cerberus FIT addressable heat detector with selectable rate of rise and fixed temperature parameter sets, for areas where smoke detection is impractical.
A Sinteso multi-sensor detector with one optical sensor and two heat sensors for rooms with low to moderate deceptive phenomena; the FDOT251-S adds Smoke Entry Supervision.
A Sinteso multi-criteria detector with 4 optical sensors and two heat sensors and ASAplus parameter sets; the FDOOT261-S adds Smoke Entry Supervision.
A Sinteso ASA multi-sensor detector that can be set as a multi-sensor, smoke or heat detector and used as an addressable FDnet or collective device.
A Sinteso detector that analyses smoke, heat and carbon monoxide for very early alarm, for places such as nursing homes and hospitals where speed of detection is critical.
A Sinteso heat detector with two redundant heat sensors for rooms where a quick temperature rise is expected or optical detection is difficult.
A Sinteso optical smoke detector with forward scattering and ASA parameter sets for early detection of flaming and smouldering fires.
A Sinteso ASA multi-sensor detector with forward and backward scattering and two heat sensors, which can be set as a multi-sensor, smoke or heat detector.
A Sinteso C-LINE optical smoke detector with forward scattering and detection algorithms (DA) for flaming and smouldering fires.
A Sinteso C-LINE multi-sensor detector with forward and backward scattering and two heat sensors, for rooms with deceptive phenomena.
A Sinteso C-LINE heat detector with two redundant heat sensors for rooms where a quick temperature rise is expected or optical detection is difficult.
An addressable detector has its own address on the detector loop, so the panel shows exactly which detector is in alarm instead of just a zone. Match the detector to the panel: Cerberus PRO FD720 detectors (OP720, OH720, HI720, HI722, OOH740, OOHC740) use C-NET, the Cerberus FIT OP360, OH360 and HI360 use C-NET, and the Sinteso FDO, FDOOT and FDT models use FDnet. The Cerberus PRO OH731 and OOH751 and the Sinteso FDOT251 and FDOOT261 are also offered, each with an optional SES version. Most models need a matching base, ordered separately.
Then choose the sensor. Optical smoke detectors (OP720, OP360, FDO241, FDO221) use light scattering to see smoke from flaming and smouldering fires. Multi-sensor detectors (OH720, OH360, OH731, FDOT251, OOH740, FDOOT241-A, FDOOT241-A9, FDOOT221) add heat sensing for better immunity to deceptive phenomena. The multi-criteria OOH751 and FDOOT261 use 4 optical sensors for multi-angle, multi-wavelength detection plus two heat sensors. The OOHC740 and FDOOTC241 add a CO sensor and analyse smoke, heat and gas for very fast response to fires that produce carbon monoxide. Heat detectors (HI720, HI722, HI360, FDT241, FDT221) suit places where smoke detection would cause false alarms.
Siemens offers several kinds of signal processing. ASA models let you pick application-specific parameter sets, ASAplus models (OOH751, FDOOT261) can switch mode and parameter set automatically without a new configuration file, and the C-LINE models (FDO221, FDOOT221, FDT221) use detection algorithms (DA). The -S versions of the OH731, OOH751, FDOT251 and FDOOT261 add Smoke Entry Supervision, which combines cover detection and grid supervision.
Standards differ by model, and each model below shows what Siemens lists, such as EN 54-7 (smoke detectors), EN 54-5 (heat detectors), EN 54-17, VdS, LPCB, DNV, MED and UKCA. FPS supplies, installs and maintains Siemens addressable detectors in Bhopal and across Madhya Pradesh and confirms the exact detector and base part numbers before ordering.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
