Siemens FT724-ZZ Cerberus PRO Remote Fire Terminal
An operating panel installed away from the central fire control panel, networkable over C-WEB/SAFEDLINK, with an optional power supply of its own.
Dealer for Siemens
Siemens Fire Terminals, Repeaters and Displays in Bhopal
Fire Protection System (FPS), a Siemens dealer in Bhopal, supplies Siemens remote fire terminals (FT724, FT2040, FT2080 touch), floor repeater terminals and displays (FT2010, FT2011, FT2030) and the FT2001 mimic display driver for Cerberus PRO and Sinteso systems. FPS installs, commissions and maintains them across Madhya Pradesh.
Where to use Annunciators & Displays
- Locations away from the main panel where the fire system must be operated (FT724, FT2040)
- Sites that want an evacuation (EVAC) operating unit at the terminal (FT724-HZ)
- Each floor of a building, to show events and their exact location (FT2010, FT2011)
- Areas where staff only need to see events, not operate the system (FT2011, FT2030)
- Hospitals, where personnel need a view of the main fire safety functions (FT2030)
- Buildings with a mimic display panel of LEDs (FT2001)
- Networked sites with several fire control panels and terminals
- Installations using Siemens wall-mounted, desktop or 19 inch pedestal housings (FT2080 touch)
Siemens Annunciators & Displays models
Siemens FT724-HZ Cerberus PRO Remote Fire Terminal with EVAC Operating Unit
The FT724 remote fire terminal fitted with an EVAC (evacuation) operating unit, for networked Cerberus PRO systems.
Siemens FT2010-A1 Cerberus PRO Floor Repeater Terminal
A small floor repeater that shows and operates events from Sinteso FS20 and Cerberus PRO FS720 systems, with a 6 line by 40 character backlit plain text display.
Siemens FT2011-A1 Cerberus PRO Floor Repeater Display
A display-only floor repeater for Sinteso FS20 and Cerberus PRO FS720 systems, with a 6 line by 40 character backlit plain text display.
Siemens FT2001-A1 Cerberus PRO Mimic Display Driver
A loop-powered driver for mimic display panels, with 2x 24 LED outputs and an integrated line separator.
Siemens FT2040-AZ Sinteso Remote Fire Terminal
A Sinteso operating panel installed away from the central fire control panel, networkable over FCnet/SAFEDLINK and connectable to the Siemens Danger Management System.
Siemens FT2080-A1 Sinteso Touch Fire Terminal
An EN 54-2 indication and operating unit with a touch front panel, for Siemens wall-mounted or desktop housings or the 19 inch pedestal housing of the FC2080.
Siemens FT2030-F1 Sinteso Floor Repeater Display for STT30-2
A floor repeater display connected to STT30-2 fire safety equipment, showing its events and those of the fire detection systems for users who only need to view the main functions.
How to choose
A fire terminal is a full operating panel installed away from the fire control panel. The Cerberus PRO FT724-ZZ and the Sinteso FT2040-AZ have slots for RS232, RS485 and SAFEDLINK networking modules and a key switch, and can run on their own power supply with the optional 70 W power supply kit and 2 x 12 V, 7 Ah batteries. Up to 32 fire control panels and terminals can share one cluster, or 16 when the cluster is linked to a danger management system, and a fibre-optic backbone can join 14 such clusters into an EN 54 network of up to 64 panels and terminals. The FT724-HZ adds an EVAC operating unit.
The FT2080-A1 is a Sinteso touch terminal, an EN 54-2 indication and operating unit with a country-specific front panel, RS232 and RS485 module positions, SAFEDLINK and an RJ45 Ethernet connection. It fits Siemens wall-mounted or desktop housings or the 19 inch pedestal housing of the FC2080.
Floor repeaters sit on the detector line itself. The FT2010-A1 terminal and the FT2011-A1 display both work with Sinteso FS20 and Cerberus PRO FS720 systems, take one address on the FDnet or C-NET line, and show events in plain text on a 6 line by 40 character backlit display. The FT2010-A1 also lets staff acknowledge and reset events, with a key switch for access; the FT2011-A1 is for viewing, with a buzzer that can be silenced. The FT2030-F1 is a floor repeater display for the STT30-2 fire safety equipment, for users such as hospital staff who only need to view the main functions.
For a mimic panel, the FT2001-A1 drives 2x 24 LED outputs, with control outputs for a local buzzer and LED operation, inputs for buzzer silence and lamp test, and an integrated line separator. FPS supplies, installs and maintains these units in Bhopal and across Madhya Pradesh and confirms the exact part numbers before ordering.
Frequently asked questions
What is a Siemens fire terminal?
It is an operating panel installed away from the main fire control panel, so events can be viewed and handled from another location. The FT724 serves Cerberus PRO systems and the FT2040 and FT2080 serve Sinteso systems.
What is the difference between a floor repeater terminal and a floor repeater display?
The FT2010-A1 terminal lets staff acknowledge and reset events. The FT2011-A1 display shows the same plain text events but is for viewing, with a buzzer that can be switched off.
Do Siemens floor repeaters need their own power supply?
No. The FT2010-A1 and FT2011-A1 are powered from the FDnet or C-NET line, and a separate 24 V supply is possible. They can run in loops or stub lines.
What does a mimic display driver do?
The FT2001-A1 switches the LEDs of a mimic display panel. It has 2x 24 LED outputs and connects to the LEDs by flat cable.
Does FPS install Siemens repeaters and terminals in Bhopal?
Yes. FPS is a Siemens dealer and supplies, installs, commissions and maintains Siemens terminals and repeaters in Bhopal and across Madhya Pradesh. Prices are on request: call or WhatsApp +91 92440 89060.