Kartar Valves Cast Iron Globe Steam Stop Valve (K-101)
Cast iron globe pattern steam stop valve from 15 mm to 200 mm, for steam up to 13 kg/cm2 at up to 220°C. Handwheel operated, with a renewable stainless steel seat and stem.
Authorised distributor for Kartar Valves
Kartar Valves Globe, Steam, Safety and Pressure Reducing Valves in Bhopal
Fire Protection System is an authorised Kartar Valves distributor in Bhopal, supplying Kartar cast iron steam stop and lift check valves for steam up to 13 kg/cm2, gunmetal globe valves to IS 778, compact pressure reducing valves and a gunmetal safety valve. We supply and install them across Madhya Pradesh.
Where to use Globe, Steam and Pressure Reducing Valves
- Boiler houses and steam distribution lines
- Process steam in factories
- Hot water and heating circuits
- Building water supply with high inlet pressure
- Pressure zones in high rise water systems
- Compressed air lines
- Hospitals, hotels and laundries
- Plumbing and small bore water lines
Kartar Valves Globe, Steam and Pressure Reducing Valves models
Kartar Valves Cast Iron Junction Steam Stop Valve, Right Angle (K-102)
Cast iron junction steam stop valve in right angle pattern, from 15 mm to 100 mm, for steam up to 13 kg/cm2 at up to 220°C. Handwheel operated, with stainless steel (AISI 410) parts.
Kartar Valves Cast Iron Horizontal Lift Check Valve (K-103)
Cast iron horizontal lift check (non return) valve from 15 mm to 200 mm, for steam up to 13 kg/cm2 at up to 220°C, with a bolted cover and renewable stainless steel seats.
Kartar Valves Cast Iron Lift Check Valve, Right Angle (K-104)
Cast iron lift check (non return) valve in right angle pattern, from 15 mm to 100 mm, for steam up to 13 kg/cm2 at up to 220°C, with a bolted cover and renewable stainless steel seats.
Kartar Valves Compact Pressure Reducing Valve, Piston Type (K-607 / K-608)
Sizes: 15 mm to 50 mm
Compact piston type pressure reducing valve with screwed female ends, from 15 mm to 50 mm, for water and air. The website lists PN10, PN16 and PN25 set at 3 bar unless specified; the product list gives the forged brass K608 in PN1.6 with a 2 to 16 kg/cm2 output and a maximum reduction to 1/4 of inlet pressure.
Kartar Valves Pressure Reducing Valve, Gunmetal (K607)
The gunmetal (bronze) version of Kartar's pressure reducing valve, K607, which Kartar offers on request. We confirm sizes and settings with the maker before quoting.
- Note: K607 in Gun Metal (Bronze) Available on Request
Kartar Valves Gunmetal Globe Valve, IS 778 (K604, K604-E, K606)
A gunmetal (bronze) globe valve made to IS 778 in PN1.0 (CI-I), used to shut off or regulate flow: K604 with screwed ends and K606 with flanged ends from 15 mm to 100 mm, and the K604-E wheel valve from 15 mm to 50 mm.
Kartar Valves Gunmetal Safety Valve, Spring Loaded, PN1.6 (K617)
Sizes: 40 mm
A gunmetal (bronze) spring loaded safety valve with screwed ends and enclosed discharge, PN1.6, in 40 mm. A safety valve opens automatically to release excess pressure.
How to choose
Pick the valve by its job. A steam stop valve is a globe pattern valve used to shut off or control steam. Kartar's K-101 is a globe steam stop valve and K-102 is a junction steam stop valve in right angle pattern, where the inlet and outlet are at 90 degrees. Both are handwheel operated, with a bolted bonnet, outside screw and yoke, a rising stem with a back seat that seals the stem when the valve is fully open, and stainless steel parts to AISI 410. K-103 (horizontal) and K-104 (right angle) are lift check valves, in which a disc lifts with the flow and drops back to stop reverse flow.
Kartar lists all four cast iron valves as suitable for steam up to 13 kg/cm2, with a maximum working temperature of 220°C, and tests the bodies hydrostatically to 26 kg/cm2 (370 psig). K-101, K-103 and K-104 are flanged to DIN-2533 and K-102 to DIN-86251 / BS-5152, all raised face (RF) at PN-16. K-101 and K-103 run from 15 mm to 200 mm, and K-102 and K-104 from 15 mm to 100 mm.
A pressure reducing valve (PRV) brings a higher inlet pressure down to a steady lower outlet pressure. Kartar's compact piston type PRV has screwed female ends from 15 mm to 50 mm and a provision for a pressure gauge, and is listed for water and air. The website gives PN10, PN16 and PN25 versions for maximum inlet pressures of 10 bar, 16 bar and 25 bar, set at 3 bar unless specified. Kartar's product list gives the forged brass K608 in PN1.6 with an output from 2 kg/cm2 to 16 kg/cm2 and a maximum reduction to 1/4 of the inlet pressure, and a gunmetal K607 on request. Because the two sources state the outlet range differently, we confirm the setting range with the maker for your duty.
For small bore water lines, Kartar's gunmetal (bronze) globe valves are made to IS 778 in PN1.0 (CI-I): K604 with screwed ends from 15 mm to 100 mm, the K604-E wheel valve from 15 mm to 50 mm, and K606 with flanged ends from 15 mm to 100 mm. A safety valve opens automatically to release excess pressure; Kartar's K617 is a gunmetal, spring loaded safety valve with screwed ends and enclosed discharge, PN1.6, in 40 mm.
Frequently asked questions
What is a steam stop valve?
It is a globe pattern valve used to shut off or regulate steam. Kartar's K-101 and K-102 cast iron steam stop valves have bolted bonnets, rising stems with back seats and stainless steel (AISI 410) parts.
What steam pressure and temperature can Kartar cast iron steam valves handle?
Kartar lists its K-101 to K-104 valves as suitable for steam up to 13 kg/cm2, with a maximum working temperature of 220°C. The bodies are hydrostatically tested to 26 kg/cm2.
What does DIN-2533 RF PN-16 mean?
It describes the flanges: DIN-2533 is a German flange standard, RF means raised face, and PN-16 is the nominal pressure class.
What outlet pressure does the Kartar compact pressure reducing valve give?
The website says it is set at 3 bar unless another setting is specified, in PN10, PN16 and PN25. The product list gives the forged brass K608 an output from 2 kg/cm2 to 16 kg/cm2, so we confirm the range for your duty.
Which Kartar globe valves suit water lines?
The gunmetal globe valves K604, K604-E and K606 are made to IS 778 in PN1.0 (CI-I) with screwed or flanged ends. The cast iron K-101 to K-104 valves are listed for steam.
How can I get a price?
Prices are on request. FPS supplies and installs Kartar valves in Bhopal and across Madhya Pradesh; call or WhatsApp +91 92440 89060 with the model, size and quantity.