Fire Protection System is an authorised Kartar Valves distributor in Bhopal, supplying Kartar CI sluice valves and DI resilient seated gate valves to IS 14846, red PN16 fire line valves, extra strong and cast steel gate valves, gunmetal gate valves to IS 778, and gears, actuators, extension stems and spares. We supply, install and maintain them across Madhya Pradesh.
Cast iron sluice valve with a non rising stem, flanged ends drilled to IS 1538, SS AISI 410 shaft and gunmetal working parts, made to IS 14846. With cap (K501 PN1.0, K503 PN1.6) or handwheel (K502 PN1.0, K504 PN1.6), 50 mm to 600 mm.
Cast iron sluice valve with a rising spindle, flanged ends drilled to IS 1538, SS AISI 410 shaft and gunmetal working parts, made to IS 14846, in PN1.0 (K505) or PN1.6 (K506), 50 mm to 600 mm.
Extra strong non rising sluice valves: the red cast iron K-931X in PN16 to IS 14846 (50 mm to 200 mm), and the made to order high pressure K504-X (PN1.6, CI body), K504-XX (PN2.0, DI body) and K504-XXX (PN2.5, DI body) in 80 mm to 200 mm.
A red cast iron sluice valve with a rising spindle for fire lines, flanged ends, SS AISI 410 stem and bronze (gunmetal) working parts, made to IS 14846 with handwheel operation in PN 16. Sizes 50 mm to 200 mm, higher on request.
Ductile iron resilient seated gate valve with a non rising stem, pocket less body, toroidal sealing, EPDM coated DI wedge and 250 micron epoxy coating, to IS 14846 and BS 5163. With handwheel (K511, 50 mm to 1000 mm) or cap (K511C, 50 mm to 300 mm); the website also lists PN10 and PN16, ISI marking and resilient or metal seating.
Ductile iron resilient seated gate valve with a rising stem of the outside screw and yoke type, handwheel operated, with EPDM coated DI wedge, toroidal sealing and 250 micron epoxy coating, to IS 14846 and BS 5163 in PN1.6, 50 mm to 600 mm.
The Aqua model of Kartar's DI resilient seated gate valve, non rising, with handwheel (K511 EH) or cap (K511 EC), EPDM coated DI wedge and 250 micron epoxy coating, to IS 14846 and BS 5163 in PN 1.6. Sizes 80, 100, 150 and 200 mm.
A red ductile iron resilient (soft) seated gate valve for fire lines, with SS AISI 410 stem, EPDM coated DI wedge and vacuum tight design, to BS 5163 and IS 14846, non rising with handwheel, PN16. Sizes 50 mm to 200 mm, higher on request.
A ductile iron sluice valve, which Kartar notes is also available alongside its cast iron sluice valves. Size, class and ends are confirmed with the maker before quoting.
A cast steel gate valve with flanged ends drilled to CL-150, a rising stem of the outside screw and yoke type and an SS AISI 410 stem, made to BS 1414. Sizes 40 mm to 300 mm.
A cast steel gate valve with flanged ends drilled to CL-300, a rising stem of the outside screw and yoke type and an SS AISI 410 stem, made to BS 1414. Sizes 40 mm to 250 mm.
A gunmetal (bronze) gate valve made to IS 778 in PN1.0 (CI-I), with screwed ends (K601) or flanged ends (K605), in 15 mm to 100 mm.
A box type enclosed gear box for Kartar sluice valves and resilient seated gate valves, listed for valve sizes 50 mm to 600 mm.
An extension stem for operating buried non rising sluice valves and resilient gate valves from above, including the fixing coupler, operative stem, outer housing and cap. Listed for valve sizes 50 mm to 600 mm.
A supervisory switch arrangement that reports the position of a sluice valve or resilient gate valve on a monitored fire main, offered UL/FM approved or non UL/FM, for rising or non rising stems.
A three phase, stay put, multi turn electrical actuator without starter for non rising sluice valves and resilient gate valves, 50 mm to 600 mm. Kartar notes it is a bought out item and the brand is confirmed before ordering.
Spares for Kartar CI valves in 50 mm to 600 mm: hand wheel, cap, SS stem with GM nut, nut and bolt sets for one IS 1538 flange, flange rubber gasket, M.S. flanges and complete flaps for GM or rubber seated NRVs.
Gate and sluice valves open and close by moving a gate, or wedge, across the pipe bore. Fully open, they leave a clear path for the water, and they are used to isolate sections of a main rather than to regulate flow. Kartar's cast iron sluice valves are made to IS 14846 with flanged ends drilled to IS 1538, an SS AISI 410 shaft and gunmetal (bronze) working parts, in 50 mm to 600 mm and in two pressure classes, PN1.0 and PN1.6.
Decide between rising and non rising stem. In a rising stem valve the stem moves up as the valve opens, so you can see at a glance whether it is open, which is useful on fire mains. A non rising stem valve keeps the stem at the same height and suits underground chambers; Kartar supplies it with a cap (K501, K503) for key operation or with a handwheel (K502, K504). The rising spindle version is K505 and K506. For red painted fire lines there is the K-931X extra strong non rising and the K-932 rising spindle sluice valve, both PN16 to IS 14846 in 50 mm to 200 mm, with higher sizes on request.
A resilient seated gate valve (RGV) closes a rubber covered wedge against the body for a tight shut off. Kartar's DI resilient seated gate valves have a pocket less body, toroidal sealing, an EPDM coated DI wedge and 250 micron epoxy coating, to IS 14846 and BS 5163 in PN 1.6: non rising with handwheel (K511, up to 1000 mm) or cap (K511C, up to 300 mm), rising stem (K511 R), the Aqua model (K511 EH, K511 EC) and the red K-933 for fire lines. Kartar's website also lists PN10 and PN16, ISI marking to IS:14846 and a CL125 version to BS:5163.
For higher pressure, the made to order extra strong K504-X (PN1.6, CI body), K504-XX (PN2.0, DI body) and K504-XXX (PN2.5, DI body) cover 80 mm to 200 mm, and cast steel gate valves are made to BS 1414 in Class 150 (K401) and Class 300 (K404). For small bore building lines choose the gunmetal gate valve to IS 778, screwed (K601) or flanged (K605), 15 mm to 100 mm. Add a K507 enclosed gear box for large valves, a K535 extension stem for buried valves, a K536 supervisory switch for monitored fire mains, or a K534 electrical actuator, which Kartar buys in and supplies.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
