Fire Protection System is an authorised Kartar Valves distributor in Bhopal, supplying Kartar wafer and double flanged butterfly valves to IS 13095 (K Line, Aqualine, Slimline, replaceable liner and two lug designs), red ISI marked PN 16 valves for fire lines, gear boxes and actuators. We supply, install and maintain them across Madhya Pradesh.
Wafer type butterfly valve with a CI body and an integrally moulded Nitrile or EPDM liner, PN 1.0, to IS 13095. K701 has a CF8-304 stainless disc and K702 a CF8M-316 disc; sizes 25 mm to 600 mm.
A red cast iron wafer butterfly valve for fire lines, with an S.S. disc, EPDM liner and SS stem, lever operated and direct actuator mountable, in PN 16 and ISI marked. Sizes 50 mm to 200 mm, higher sizes on request.
Wafer type butterfly valve with a CI body and integrally moulded Nitrile or EPDM liner, PN 1.0, lever operated, to IS 13095. K706A has a DI disc and K707A a CF8/304 stainless disc; sizes 40 mm to 150 mm.
A red cast iron wafer butterfly valve for fire lines, with an SG iron disc, EPDM liner and SS stem, lever operated, PN 16 and ISI marked. Sizes 50 mm to 200 mm, higher sizes on request.
Wafer type butterfly valve with a CI body and integrally moulded Nitrile or EPDM liner, PN 1.0, to IS 13095. K706 has a DI disc and K707 a CF8/304 stainless disc; sizes 25 mm to 600 mm.
Wafer type butterfly valve with a CI body and a replaceable Nitrile or EPDM liner, PN 1.0, to IS 13095, lever operated up to 200 mm. K703 has a CF8/304 disc and K704 a CF8M:316 disc; spare liners are sold as K705.
A two lug version of the CI body wafer butterfly valve with an integrally moulded Nitrile or EPDM liner, PN 1.0, lever operated, to IS 13095. K701N has a CF8-304 disc and K702N a CF8M-316 disc; sizes 50 mm to 150 mm.
Wafer type butterfly valve with a cast steel body, integrally moulded Nitrile or EPDM liner and CF8/304 stainless disc, PN 2.5, to IS 13095 and BS.5155. Sizes 25 mm to 300 mm.
A high pressure wafer butterfly valve with a DI body and integrally moulded Nitrile or EPDM liner, PN 2.0, to IS 13095, made to order. K701-XS has an S.S disc and K701-XD a D.I disc; sizes 50 mm to 300 mm.
Double flanged butterfly valve with a DI body, integrally moulded Nitrile or EPDM liner and centre line disc, PN 1.0, to IS 13095. Gear operated in 80 mm to 300 mm (K714 DI disc, K715 SS disc) or lever operated in 80 mm to 200 mm (K714 L, K715 L).
Double flanged, double eccentric butterfly valve with a DI body and disc and a Nitrile or EPDM rubber seal, PN 1.6, gear operated. Sizes 80 mm to 1000 mm.
A box type gear operator for butterfly valves, listed for valve sizes 25 to 150 mm, 200 to 300 mm, 350 to 450 mm and 500 to 600 mm.
Quarter turn pneumatic actuators for butterfly valves, double acting (K717) or single acting (K718), listed for valves from 40 mm to 600 mm. Kartar does not manufacture actuators: it buys and supplies them as per customer requirement.
Quarter turn on and off electrical actuators for butterfly valves, supplied without starters, for 3 phase 415V supply (K719-3P) or single phase 220V supply (K719-1P). Kartar buys and supplies these as per customer requirement.
A supervisory switch arrangement with position indicator, offered UL/FM approved (fitted only with a gear) or non UL (fitted with a lever or gear). Kartar buys and supplies it as per customer requirement.
A butterfly valve opens and closes the flow with a disc that turns a quarter turn inside the pipe, so it is compact and quick to operate. Kartar's wafer valves are made to IS 13095 and fit between two pipe flanges. The K Line (K701 with CF8-304 disc, K702 with CF8M-316 disc) and the Slimline (K706 with DI disc, K707 with SS disc) have a CI body with an integrally moulded Nitrile or EPDM liner, PN 1.0, from 25 mm to 600 mm. The Aqualine (K706A, K707A) covers 40 mm to 150 mm with lever operation, and the two lug design (K701N, K702N) covers 50 mm to 150 mm. Where the liner may need changing in service, choose the replaceable liner valve (K703, K704), with spare liners (K705).
For fire hydrant and sprinkler lines Kartar makes red, ISI marked wafer valves in PN 16, lever operated, from 50 mm to 200 mm: K-935 with an S.S. disc and actuator mountable top, and K-934 with an SG iron disc, both with an EPDM liner and SS stem. For higher pressure there is the cast steel body K713 in PN 2.5 (IS 13095 and BS.5155, 25 mm to 300 mm) and the made to order DI body K701-XS and K701-XD in PN 2.0 (50 mm to 300 mm).
For larger lines and flanged connections, choose a double flanged valve. The centre line disc design (K714 DI disc, K715 SS disc) has a DI body and moulded liner in PN 1.0, gear operated from 80 mm to 300 mm or lever operated (K714 L, K715 L) up to 200 mm. The double eccentric K716 has a DI body with a Nitrile or EPDM rubber seal in PN 1.6, gear operated, from 80 mm to 1000 mm.
Small wafer valves are lever operated; Kartar fits a gear above 150 mm or 200 mm depending on the model, and sells the K709 box type gear separately. Most wafer valves are direct actuator mountable. Kartar supplies pneumatic actuators (K717 double acting, K718 single acting), electrical on and off actuators without starters (K719, 415V three phase or 220V single phase) and a supervisory switch with position indicator (K720, UL/FM approved or non UL), but states that it does not manufacture actuators: it buys and supplies them as per customer requirement.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
