Kartar Valves DI Socket Bend, 90 Degree
Ductile iron double socket (D/S) bend that turns a main through 90 degrees, ISI marked to IS 9523 and tested to 25 kg/cm2, in 80 mm to 500 mm.
Authorised distributor for Kartar Valves
Kartar Valves DI Pipe Fittings in Bhopal
Fire Protection System is an authorised Kartar Valves distributor in Bhopal, supplying Kartar ISI marked ductile iron (DI) fittings to IS 9523, tested to 25 kg/cm2, for water and fire mains: socket and flanged bends, tees, tapers, flanges, collars, end caps, plugs, mechanical joints and rubber gaskets. We supply them for projects across Madhya Pradesh.
Where to use DI Pipe Fittings
- Underground fire hydrant ring mains
- Water supply and transmission mains
- Pump house and valve chamber pipework
- Township and municipal water networks
- Industrial water and effluent lines
- Sewage and drainage lines
- Water treatment plants
- Campus and industrial estate mains
Kartar Valves DI Pipe Fittings models
Kartar Valves DI Socket Bend, 45 Degree
Ductile iron double socket (D/S) bend that turns a main through 45 degrees, ISI marked to IS 9523 and tested to 25 kg/cm2, in 80 mm to 450 mm.
Kartar Valves DI Socket Bend, 22.5 and 11.25 Degree
Ductile iron double socket (D/S) bends for gentle changes of direction, at 22.5 or 11.25 degrees, ISI marked to IS 9523 and tested to 25 kg/cm2, in 80 mm to 450 mm.
Kartar Valves DI Flanged Bend, 90 Degree
Ductile iron double flanged (D/F) bend that turns a line through 90 degrees, typically at pumps and valves, ISI marked to IS 9523, in 80 mm to 300 mm.
Kartar Valves DI Duckfoot Bend with Flange
A flanged ductile iron duck foot bend, a bend with a foot that supports a vertical pipe at its base, ISI marked to IS 9523, in 80 mm to 200 mm.
Kartar Valves DI All Socket Tee
A ductile iron all socket (A/S) tee for taking a branch off a socket jointed main, ISI marked to IS 9523, in sizes from 80 x 80 x 80 to 450 x 450 x 450.
Kartar Valves DI All Flange Tee
A ductile iron all flange (A/F) tee for flanged pipework, ISI marked to IS 9523, in sizes from 80 x 80 x 50 to 200 x 200 x 200.
Kartar Valves DI All Socket Y Tee
A ductile iron Y tee with socket ends for an angled branch, ISI marked to IS 9523, in 100 x 100 x 100, 150 x 150 x 100 and 150 x 150 x 150.
Kartar Valves DI Tee with Flanged Branch (Fire Hydrant and Air Valve Tee)
A ductile iron tee with a flanged branch for fire hydrants and air valves (F.H. / air valve tee), ISI marked to IS 9523, with 40, 50, 80 or 100 mm branches on mains from 80 x 80 to 450 x 450.
Kartar Valves DI Socket Taper (Reducer)
A ductile iron double socket (D/S) taper that joins pipes of two different sizes, ISI marked to IS 9523, listed from 100 x 100 x 80 to 450 x 450 x 400.
Kartar Valves DI Flange Taper (Reducer)
A ductile iron double flanged (D/F) taper that connects flanged lines of two different sizes, ISI marked to IS 9523, listed from 100 x 100 x 80 to 300 x 300 x 250.
Kartar Valves DI Flange Socket
A ductile iron piece with a flange at one end and a socket at the other, for connecting a flanged item to a plain pipe end, ISI marked to IS 9523, in 80 mm to 600 mm.
Kartar Valves DI Flange Spigot
A ductile iron piece with a flange at one end and a plain spigot at the other, which fits into a socket joint, ISI marked to IS 9523, in 80 mm to 600 mm.
Kartar Valves DI Flange
A ductile iron flange in PN 1.0, drilled to IS 1538 as standard, in 50 mm to 1200 mm. Kartar's flange OD table also covers IS 9523, Tables D, E, F and H and Class 150.
Kartar Valves DI Blank Flange
A ductile iron blank flange (listed on the website as DI Black Flange) that closes a flanged end, ISI marked to IS 9523, in 80 mm to 600 mm.
Kartar Valves DI Collar
A ductile iron collar, a sleeve that joins two plain pipe ends and is also used in pipe repairs, ISI marked to IS 9523, in 100 mm to 300 mm.
Kartar Valves DI End Cap
A ductile iron cap that closes the end of a pipe, ISI marked to IS 9523, in 80 mm to 450 mm.
Kartar Valves DI Plug
A ductile iron end plug that closes off a socket end, ISI marked to IS 9523, in 80 mm to 450 mm.
Kartar Valves DI Mechanical Joint (M/J Collar)
A ductile iron mechanical joint collar (M/J collar), in which a gland and bolts press a rubber gasket around the pipe to seal it, ISI marked to IS 9523, in 80 mm to 600 mm.
Kartar Valves Tyton Rings
Rubber gasket rings that seal push on socket joints in ductile iron pipes and fittings. Sizes are confirmed on enquiry.
Kartar Valves Rubber Gasket, Natural or EPDM
Rubber gaskets for ductile iron socket joints, in natural rubber or EPDM, for 80 mm to 600 mm.
- Item: Rubber Gasket
- Material: Natural / EPDM
- Sizes: 80mm, 100mm, 150mm, 200mm, 250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 600mm
How to choose
DI stands for ductile iron. DI fittings join ductile iron pipes and connect them to valves, pumps and hydrants. They come with two kinds of joint: socket ends, where a plain pipe end pushes into the socket and seals on a rubber ring, and flanged ends, which bolt to a matching flange on a valve or another fitting. Kartar's DI fittings are ISI marked to IS 9523 and tested to 25 kg/cm2. IS 9523 does not specify weights, so Kartar makes no commitment on fitting weights.
For changes of direction, Kartar makes double socket (D/S) bends at 90 degrees (80 mm to 500 mm) and at 45, 22.5 and 11.25 degrees (80 mm to 450 mm), a double flanged (D/F) 90 degree bend (80 mm to 300 mm) and a duck foot bend (80 mm to 200 mm), which supports a vertical pipe at its base. For branches there are all socket (A/S) tees from 80 x 80 x 80 to 450 x 450 x 450, all flange (A/F) tees up to 200 x 200 x 200, Y tees in 100 and 150 mm, and fire hydrant and air valve tees with a flanged branch of 40, 50, 80 or 100 mm on mains up to 450 mm. Tapers (reducers) come double socket (D/S) and double flanged (D/F).
Flange spigot and flange socket pieces (80 mm to 600 mm) connect flanged valves to socket jointed pipe, collars (100 mm to 300 mm) and M/J collars (mechanical joints, 80 mm to 600 mm) join plain pipe ends, and blank flanges, end caps and end plugs close off lines. Kartar's standard flanges are drilled to IS 1538 and made in PN 1.0 from 50 mm to 1200 mm; its flange outside diameter table also lists IS 9523 PN 1.0 and PN 1.6, Tables D, E, F and H and Class 150, which helps when matching flanges to other equipment. Seal socket joints with rubber gaskets in natural rubber or EPDM (80 mm to 600 mm) or Tyton rings.
Frequently asked questions
What does DI mean in pipe fittings?
DI stands for ductile iron, the material of the fitting body. Kartar's bends, tees, reducers, flanges and other fittings in this range are listed as DI.
Are Kartar DI fittings ISI marked?
Yes. Kartar lists its DI fittings as ISI marked to IS 9523 and tested to 25 kg/cm2. Weights are not committed, as IS 9523 does not specify them.
What is the difference between a socket fitting and a flanged fitting?
A socket fitting takes a plain pipe end pushed into it and sealed with a rubber ring, while a flanged fitting bolts to another flange. Socket joints are common on buried mains, and flanges are common at valves and pumps.
Which sizes are available?
Most Kartar DI fittings run from 80 mm up to 450 mm or 600 mm depending on the type, and flanges from 50 mm to 1200 mm. Tell us the fitting and size and we will confirm it.
Can Kartar flanges match other flange standards?
Kartar's standard flanges are to IS 1538. Its flange OD table covers IS 9523, Tables D, E, F and H and Class 150, and any change of flange OD needs the maker's confirmation.
How can I get a price?
Prices are on request. FPS supplies Kartar DI fittings for projects in Bhopal and across Madhya Pradesh; call or WhatsApp +91 92440 89060.