Notifier FCM-1 Addressable Control Module
An intelligent addressable control module that supervises wiring to devices powered from an external supply, such as horns, strobes or bells, with Class A or Class B supervision.
Dealer for NotifierNotifier FTM-1 Firephone Control Module
A module that lets the fire alarm panel monitor and control a circuit of up to two firefighter phones and connect remote phones to a central telephone console.
- Monitors and controls up to two firefighter phones
- Tells apart normal, off-hook and trouble conditions
- Two pairs of output terminals for fault-tolerant Style Z wiring
- Powered directly by the two-wire SLC loop, address 01 to 159 in FlashScan
- 15 to 32 VDC, 0°C to 49°C
- UL listed and FM approved, ULC listed as FTM-1A, with CSFM and FDNY listings
Standards and approvals: UL Listed: S635, ULC Listed: S635 (FTM-1A), FM Approved, CSFM: 7300-1653:0182, 7165-0028:0224, 7165- 0028:0243, FDNY: COA #6065, #6067
Specifications
Specifications
| Specification | Details |
|---|---|
| Normal operating voltage | 15 to 32 VDC. |
| Maximum current draw | 7.5 mA (LED on). |
| Average operating current | 7.5 mA group poll (FlashScan® mode) with LED flashing. |
| External supply voltage (between Terminals T3 and T4) | maximum 28 VDC. |
| EOL resistance | 3.9K ohms. |
| Temperature range | 32°F to 120°F (0°C to 49°C). |
| Humidity range | 10% to 93% non-condensing. |
| Dimensions | 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. |
| Weight | 6.3 oz. |
Specifications as published by Notifier. Please confirm the exact model with us before ordering.
More Notifier Interfaces & Modules
Notifier FRM-1 Addressable Relay Module
An addressable relay module giving a dry-contact output to switch auxiliary devices such as fans, dampers and control equipment, using one of 159 module addresses on the SLC loop.
Notifier FMM-1 Addressable Monitor Module
An intelligent monitor module that supervises a circuit of dry-contact devices, such as conventional heat detectors and pull stations, or monitors and powers a circuit of two-wire smoke detectors.
Notifier FZM-1 Zone Interface Module
A standard-sized zone module that monitors and supervises compatible two-wire, 24 volt smoke detectors on a Style D (Class A) or Style B (Class B) circuit and reports the zone to the panel.
Notifier FDM-1 Dual Monitor Module
A dual monitor module that gives two independent two-wire initiating device circuits at two consecutive addresses, for fire alarm, supervisory or security contacts.
Notifier FMM-101 Mini Monitor Module
A small intelligent monitor module that fits inside devices or junction boxes, supervising dry-contact devices or monitoring and powering two-wire smoke detectors.
Fire Alarm Interfaces and Modules from other brands
Morley by Honeywell
Morley by Honeywell MI/DMMI Addressable Single Input Monitor Module
A single channel addressable input module for Morley-IAS intelligent panels. It watches an external device and reports normal, open circuit and alarm states to the panel.
Morley by Honeywell
Morley by Honeywell MI-MM3E-S2 Mini Monitor Module
A small monitor module that fits in a single gang junction box directly behind the device it monitors, giving a two-wire initiating circuit for normally open fire alarm and security contacts.
System Sensor
System Sensor M201EA-240 Addressable Mains Switching Output Module
A loop-powered output module from the Series 200 plus range that controls an unsupervised double pole output for 240VAC loads, latching on or off on command from the panel.
System Sensor
System Sensor M200E Series Addressable Input/Output and Isolator Modules
Single and multi-way addressable modules on one mechanical platform that can be box, panel or DIN rail mounted, with the address switch and LEDs visible whichever mounting is used.
Apollo
Apollo Intelligent Input/Output Module
A loop device that monitors single pole, volt-free contact inputs and controls relay output contacts, linking the fire panel to other equipment. It works with XP95, Discovery and CoreProtocol.
Apollo
Apollo Intelligent Input/Output Module, 250V AC
An input/output module with two input channels for single pole, volt-free contacts and mains switching relay output contacts.