Morley by Honeywell MI/DMMI Addressable Single Input Monitor Module
A single channel addressable input module for Morley-IAS intelligent panels. It watches an external device and reports normal, open circuit and alarm states to the panel.
Dealer for Morley by HoneywellMorley by Honeywell HM/D240CMO/UL Addressable Relay Module (Morley UL)
An addressable relay module that gives a dry contact output for fans, door holders, dampers and control equipment, and can reset four-wire smoke detector power.
- Dry contact output activated by panel programming
- For fans, door holders, dampers and other auxiliary devices
- Can reset four-wire smoke detector power
- Relay contacts rated 3.0 A at 30 VDC, resistive, non-coded
- Mounts to a 4 inch square box; 0°C to 49°C
- UL Listed S35595
Standards and approvals: UL Listed: S35595
Download the official Morley by Honeywell catalogue (PDF, 2.3 MB)
Specifications
Specifications
| Specification | HM/D240CMO/UL |
|---|---|
| Normal operating voltage | 15 to 32 VDC |
| Maximum SLC current draw | 6.5 mA (LED on) |
| Average operating current | 230 μA direct poll (CLIP mode) with LED flashing |
| EOL resistance | Not Used. |
| Temperature range | 32°F to 120°F (0°C to 49°C) |
| Humidity range | 10% to 93% non-condensing |
| Dimensions | 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.215" (5.398 cm) deep box |
| Load Descripton | Resistive |
| Application | Non-Coded |
| Maximum Voltage | 30 VDC |
| Current Rating | 3.0 A |
Specifications as published by Morley by Honeywell. Please confirm the exact model with us before ordering.
More Morley by Honeywell Interfaces & Modules
Morley by Honeywell MI-MM3E-S2 Mini Monitor Module
A small monitor module that fits in a single gang junction box directly behind the device it monitors, giving a two-wire initiating circuit for normally open fire alarm and security contacts.
Morley by Honeywell MI/DISO Loop Isolator Module
A loop isolator for Morley-IAS intelligent panels that protects the addressable loop against wire-to-wire short circuits by disconnecting the faulty section.
Morley by Honeywell MI/DCMO Addressable Control Output Module
A single channel addressable output module that provides either a single alarm circuit or a Form C relay, for door holders, air handling unit shut down and similar functions.
Morley by Honeywell MI/D2ICMO Dual Input, Single Output Addressable Module
An addressable module with two monitored input circuits and one volt-free changeover relay, for reading external devices and controlling an external circuit.
Morley by Honeywell MI/D240CMO 240V AC Output Module
A loop-powered wall mounting output module for switching 240Vac loads, with an unsupervised double pole relay that latches on or off on command from the panel.
Fire Alarm Interfaces and Modules from other brands
Notifier
Notifier FCM-1 Addressable Control Module
An intelligent addressable control module that supervises wiring to devices powered from an external supply, such as horns, strobes or bells, with Class A or Class B supervision.
Notifier
Notifier FRM-1 Addressable Relay Module
An addressable relay module giving a dry-contact output to switch auxiliary devices such as fans, dampers and control equipment, using one of 159 module addresses on the SLC loop.
System Sensor
System Sensor M201EA-240 Addressable Mains Switching Output Module
A loop-powered output module from the Series 200 plus range that controls an unsupervised double pole output for 240VAC loads, latching on or off on command from the panel.
System Sensor
System Sensor M200E Series Addressable Input/Output and Isolator Modules
Single and multi-way addressable modules on one mechanical platform that can be box, panel or DIN rail mounted, with the address switch and LEDs visible whichever mounting is used.
Apollo
Apollo Intelligent Input/Output Module
A loop device that monitors single pole, volt-free contact inputs and controls relay output contacts, linking the fire panel to other equipment. It works with XP95, Discovery and CoreProtocol.
Apollo
Apollo Intelligent Input/Output Module, 250V AC
An input/output module with two input channels for single pole, volt-free contacts and mains switching relay output contacts.