System Sensor S300PTU Programming and Test Tool (Series 300)
A menu driven hand-held tool for System Sensor Series 300 conventional detectors, giving access to detector functions and logs.
Dealer for System Sensor
System Sensor Accessories and Test Equipment in Bhopal
Fire Protection System (FPS), a System Sensor dealer in Bhopal, supplies System Sensor accessories and test equipment: beam detector mounting and long-range kits, remote test stations for duct detectors, the S300PTU programming and test tool, and the M200E-SMB module mounting box. FPS installs, tests and maintains them across Madhya Pradesh.
Where to use Accessories & Test Equipment
- Warehouses with reflected beam detectors
- Atriums and lobbies with high ceilings
- Arenas and large halls
- Churches and other spacious rooms
- HVAC ducts fitted with duct smoke detectors (remote test stations)
- Series 300 conventional detector systems (S300PTU)
- Addressable loops using M200 series modules (M200E-SMB)
System Sensor Accessories & Test Equipment models
System Sensor M200E-SMB Surface Mounting Box for Addressable Modules
A surface mounting enclosure for System Sensor addressable input and output modules. The base is fixed to the wall, then the module and cover are screwed on with the two screws supplied.
System Sensor BEAMSMK Surface Mounting Kit for Reflected Beam Detectors
A kit for mounting reflected beam smoke detectors where surface wiring is used.
System Sensor BEAMMMK Multi-Mounting Kit for Reflected Beam Detectors
A bracket kit for mounting a reflected beam detector or a reflector on a wall or ceiling, with extra alignment range when the two cannot be mounted within 10° of each other.
System Sensor BEAMLRK Long-Range Kit for Reflected Beam Detectors
A kit that lets reflected beam detectors be installed at separations between 70 and 100 m by adding extra reflectors.
System Sensor RTS151 Remote Test Station for Duct Smoke Detectors
A remote test station for testing duct smoke detectors from a convenient location, with an alarm LED that lights red for 2-wire detectors.
System Sensor RTS151KEY Remote Test Station with Key
The key-operated version of the RTS151 remote test station, for testing duct smoke detectors from a convenient location.
How to choose
Beam detector kits solve mounting and distance problems for reflected beam smoke detectors. The BEAMSMK surface mounting kit is used when the wiring runs on the surface; it must be fixed firmly so the detector cannot move after installation and keeps line of sight to the reflector. The BEAMMMK multi-mounting kit fixes a detector or a reflector to a wall or ceiling and gives extra alignment range when the two cannot be mounted within 10° of each other; one kit covers one unit, so two kits are needed if both ends need extra range. The BEAMLRK long-range kit allows separations of 70 to 100 m by adding 3 reflectors to the one supplied with the detector.
For duct smoke detectors that are hard to reach, a remote test station lets you test the detector from a convenient location. The RTS151 and the key-operated RTS151KEY have test and reset switches and an alarm LED that lights red for 2-wire detectors.
For Series 300 conventional detectors, the S300PTU is a menu driven tool that talks to the detector through its LED at close range, giving access to its functions and logs. The M200E-SMB is a surface mounting box for System Sensor M200, M700, TC800 and MI-XXX input and output modules, with a black transparent cover so the module can be seen inside.
FPS supplies System Sensor accessories and test equipment, and installs and maintains the systems they support, in Bhopal and across Madhya Pradesh.
Frequently asked questions
What does the BEAMLRK long-range kit do?
It lets a reflected beam detector work at separations of 70 to 100 m. At these distances four 8 x 8 inch reflectors are used: the kit adds 3 reflectors with new test scale legends to the one supplied with the detector.
When is the BEAMMMK multi-mounting kit needed?
When a beam detector and its reflector cannot be mounted within 10° of each other, or need to go on a wall or ceiling. One kit mounts one transmitter/receiver or one reflector, so two kits are needed if both need extra alignment range.
What is a remote test station for a duct detector?
It is an accessory, mounted in a convenient place, that lets you test a duct smoke detector without reaching the duct. The RTS151 has test and reset switches and an alarm LED rated 2.8 to 32 VDC.
What is the S300PTU used for?
It is a menu driven programming and test tool for System Sensor Series 300 detectors. It communicates with the detector at close range through the detector LED to access its functions and logs.
Does FPS supply System Sensor accessories in Bhopal?
Yes. FPS is a System Sensor dealer and supplies System Sensor accessories and test equipment in Bhopal and across Madhya Pradesh, along with installation and maintenance. Prices are on request: call or WhatsApp +91 92440 89060.