Bosch Fire Panel Modules and Power Supplies in Bhopal

Bosch AVENAR panels are modular: functional modules plug onto a rail inside the panel housing, which gives them power and internal communication. Pick modules for what the system must connect. The LSN 0300 A loop module drives an LSN loop with up to 254 LSN improved elements or 127 classic LSN elements at up to 300 mA, with line lengths up to 1600 m depending on configuration and cable type. The LSN 1500 A handles the same number of elements with up to 1500 mA of line current and line lengths up to 3000 m. Both accept unshielded cable and loop, stub or T-tap wiring.

For other connections: the CZM 0004 A gives four monitored conventional zones for 2-wire or 4-wire devices, the NZM 0002 A gives two monitored lines for sirens, strobes or horns using polarity reversal, the IOP 0008 A has eight inputs and eight open collector outputs, the RML 0008 A has eight low voltage change-over relays, and the RMH 0002 A has two high voltage relays with feedback for door magnets, fans or smoke dampers, which Bosch says can also serve as an extinguishing interface in line with VdS 2496. The IOS 0232 A adds two RS232 serial ports and the ANI 0016 A shows the status of 16 programmable detection points.

For power, the battery controller modules (FPE-8000-BCM and BCM-0000-B) monitor the panel power supply and charge the batteries under time and temperature control, each with two 2.8 A outputs at 24 V. The UPS 2416 A is the plug-and-play power supply unit for the panel. For field power away from the panel, the FPP 5000 kit holds two batteries with every output electronically fused and monitored, and the FPP-3000 gives 5.0 A with space for 2 x 40 Ah batteries and seven separately fused AUX outputs.

FPS supplies, installs, configures and maintains Bosch panel modules and power supplies in Bhopal and across Madhya Pradesh. Confirm module compatibility with your panel and the exact part numbers with FPS before ordering.