Fire Protection System is an authorised Ceasefire distributor in Bhopal, supplying conventional and Intelli-Sense addressable fire alarm panels, detectors, manual call points, sounders, loop modules, network and monitoring equipment, and Wave-Sense wireless devices. Most of the range is designed and tested to the EN 54 series of fire alarm standards, with LPCB, BSI or IMQ certification on many devices.
Conventional fire alarm panels in 2, 4, 8, 12, 16, 24 and 32 zone sizes, approved to EN 54-2 and 4. The 8 zone and larger panels can be networked, up to 8 control panels, and work with repeater or remote display units.
Addressable fire alarm panels in 1 loop, 1 to 2 loop and 1 to 4 loop versions, each loop taking up to 240 addressable detectors and devices. Approved to EN 54-2, EN 54-4 and EN 54-13, with 200 fire zones per panel and up to 2000 zones over the Intelli-Sense-NeT network.
Addressable panel that expands from 2 to 8 loops with plug-in loop driver boards, taking up to 240 devices per loop, offered for standard (ST) or fault tolerant (FT) networks. Approved to EN 54-2, EN 54-4 and EN 54-13.
Conventional control panel for gas suppression, with 3 detection zones and 1 extinguishing zone that can drive solenoid or Metron actuators. A large LCD countdown timer shows the time to release.
Repeater panel that shows fire and fault status for 12 zones away from the main panel, with controls enabled by key switch or code entry. It has its own 1.25 A power supply with battery backup.
Remote display for conventional fire alarm systems with a 4 x 40 character backlit LCD and full system control. It runs from a 24 V DC supply and has fire and fault outputs.
Networked terminal that shows information from across an Intelli-Sense-NeT network and gives Mute, Reset, Silence and Resound controls. Sector based keys let each building on a multi building site control only the fires in its own building.
Compact networked display terminal for viewing information from across an Intelli-Sense-NeT network, with a Mute key that silences the warning buzzers on other network panels.
Larger networked terminal with system keys for Mute, Reset, Silence and Resound, programmable push buttons and 18 amber fault and system LEDs. It displays up to 2000 fire zones from across the network.
Networked touch screen terminal with a 1280 x 800 display that works with a fireman's glove, plus interactive site maps and zone plans. It joins the network over two cores and has an on-board standard network card.
Plug-in cards that link Intelli-Sense panels into one network sharing up to 1000 zones. The fault tolerant card (TI-002324) supports a 200 panel network with up to 1.5 km between panels, and the standard card (TI-002325) a 32 panel network with up to 1.5 km of total cable.
Gateway that gives remote access to an Intelli-Sense-Net fire network through a standard web browser, with password protection, multiple user permissions and email event notification. It comes for standard or fault tolerant networks, as a bare PCB or in an IP30 enclosure.
Interface that links a single Intelli-Sense network to a building management system over BACnet or Modbus, with 640 configurable objects. It is supplied as TI-002334 or as a configured version, TI-002335.
Windows PC software that shows an Intelli-Sense-NeT network as graphics, text or an event list, licensed for up to 3, 15 or 200 network nodes. It keeps event and alarm history and allows zoom control of graphics and symbols.
Premium version of the graphic control software for up to 15 or 200 network nodes, adding groups, slaves, event printer, service and history modes. SMS and email alerts can be added with a hardware component and licence upgrade.
Addressable detector that combines optical smoke and heat sensing, with 9 modes of operation and 4 smoke sensitivity levels. The TI-002213 version has a built-in isolator to EN 54-17; the TI-002214 is without.
Addressable heat detector with a Class A1R alarm setting and multiple sensitivity settings, approved to EN 54-5 and certified by LPCB. The TI-002215 version adds a bi-directional isolator against cable faults; the TI-002216 is without.
Mounting base for all Intelli-Sense detectors, 110 mm across and 16 mm deep, with device locking and remote indicator connections.
Detector base compatible with both Pro-Sense and Intelli-Sense detectors, 110 mm across and 16 mm deep.
Single action push button call point for addressable loops, with a built-in short circuit isolator and a resettable operating element. Approved to EN 54-11 and EN 54-17 and certified by LPCB; TI-002431 is the new variant.
Loop powered sounder built into a detector base, with 32 selectable tones, up to 94 dB at 1 m and a built-in loop isolator. Approved to EN 54-3 and certified by LPCB.
Addressable base sounder with a visual indicator that flashes at 1 Hz and can be seen from all around, plus 32 tones and up to 94 dB at 1 m. Approved to EN 54-3, with LPCB listed.
Loop powered addressable module with one monitored input circuit, used to watch a contact from the fire alarm loop. Approved by BSI to EN 54-17 and EN 54-18, in a standard back box version (TI-002221) and a smaller mini mount (TI-002295).
Addressable module with one relay output switching volt free changeover contacts rated 2 A at 30 V DC, for controlling other equipment from the fire panel. BSI approved to EN 54-17 and EN 54-18, in standard (TI-002220) and mini mount (TI-002297) versions.
Addressable module with one monitored input and one supervised output, the output rated 2 A at 30 V DC. BSI approved to EN 54-17 and EN 54-18, in standard (TI-002222) and mini mount (TI-002298) versions.
Addressable module that monitors one input and switches volt free changeover relay contacts rated 2 A at 30 V DC. BSI approved to EN 54-17 and EN 54-18, in standard (TI-002223) and mini mount (TI-002299) versions.
Addressable module with one monitored (supervised) output circuit and provision for switching an external power input, rated 2 A at 30 V DC. BSI approved to EN 54-17 and EN 54-18.
Addressable module with 4 monitored inputs and 4 relay outputs in one box, for places that need several inputs and outputs together. Approved to EN 54-17 and EN 54-18 and certified by IMQ.
Addressable module with 4 monitored inputs, 2 relay (form C) outputs and 2 supervised outputs in one box. Approved to EN 54-17 and EN 54-18 and certified by IMQ.
Addressable module that fits CFX-Plus modular wall sounders and sounder beacons (TI-002272 and TI-002273) and connects them to the loop. Approved by LPCB to EN 54-17 and EN 54-18.
Addressable module that monitors one conventional zone circuit with up to 20 conventional devices, so a conventional zone can join an addressable loop. It has one relay output rated 2 A at 30 V DC and is approved to EN 54-17 and EN 54-18 with IMQ certification.
Loop powered module that opens the loop automatically when it detects a short circuit, so the fault does not take down the whole loop, and resets itself once the short is cleared. It can cut off up to 32 Intelli-Sense Lite devices and is designed to EN 54-17.
Conventional heat detector with a Class A1R response, certified by LPCB, with a double dust trap chamber and a central LED visible from all around.
Conventional heat detector with a 78 C alarm point (Class BS), designed and tested to EN 54-5 and certified by LPCB.
White LED beacon for visual fire warning, flashing once every 2 seconds (0.5 Hz), approved to EN 54-23 and certified by LPCB.
Modular conventional wall sounder with up to 100 dB(A) at 1 m, 32 tones and two stage alarm capability, weatherproof as standard. Designed and tested to EN 54-3 and certified by LPCB.
Conventional wall sounder with a built-in visual indicator flashing at 1 Hz, up to 100 dB(A) at 1 m and 32 tones. Designed and tested to EN 54-3 and EN 54-23 and certified by LPCB.
Air sampling housing that lets a smoke detector check the air inside a ventilation duct, for air speeds of 0.5 m/s to 2.0 m/s. It takes Intelli-Sense, Pro-Sense and Wave-Sense smoke detectors and is designed to comply with EN 54-27.
Red polycarbonate housing that protects a CFX-Plus call point from weather and misuse, rated IPX5 to BS EN 60529. An optional 90 dB tamper alarm with a low battery LED helps reduce unwanted alarms.
Abort switch for extinguishing systems, compatible with the Rapid-Sense control panel and complying with BS 7273-1 requirements.
Latching push button for manual release of an extinguishing system, compatible with the Rapid-Sense control panel and complying with EN 12094-3.
Small end of line module for the Rapid-Sense manual release switch circuit, measuring 38 x 27 x 15 mm.
Home kitchen gas detector that warns of LPG and natural gas leaks, with a 6 m detection range and a response time under 30 seconds. It is installed 2 to 4 m away from hot appliances.
A stop sign style alarm that mounts next to a fire extinguisher and sounds 85 dB at 1 m if the extinguisher is moved, to discourage theft, misuse and vandalism. It runs on a 9 V battery, with 12 V or 24 V DC remote powered models.
Optional sounder and strobe beacon that connects to pressure switch compatible Ceasefire products, such as wall mounted and ceiling mounted automatic extinguishers, to give a clear alert in the event of a fire.
Battery powered photoelectric smoke alarm for homes, small offices and other indoor spaces, with a built-in 85 dB siren. It uses replaceable AA batteries and is compliant with UL 217.
Slim photoelectric smoke alarm with an 85 dB siren and a safety path light that lights the escape route in smoke or darkness. It runs on a sealed 10 year lithium battery and is compliant with UL 217.
Battery powered wireless call point with a single action push button and resettable element, communicating on 865 MHz with up to 150 m range in open space. Designed and tested to EN 54-11 and EN 54-25 and certified by IMQ; TI-002347 is the new variant.
Wireless detector with a dual path optical smoke chamber and heat sensing, 3 smoke sensitivity levels and Class A1R or Class BS heat settings. Designed and tested to EN 54-5, EN 54-7 and EN 54-25, complies with EN 54-29 and is certified by IMQ.
Wireless heat detector with multiple sensitivity settings, including Class A1R and Class BS, and twin LEDs visible from all around. Designed and tested to EN 54-5 and EN 54-25 and certified by IMQ.
Wireless interface module (TI-002256) that fits inside Pro-Sense modular wall sounders and sounder beacons to make them wireless, listed with the TI-002272 wall sounder for up to 100 dB at 1 m and 32 tones. Designed and tested to EN 54-3, EN 54-18 and EN 54-25 and certified by IMQ.
Wireless sounder with a 1 Hz strobe, made from the TI-002256 interface and the TI-002273 sounder with visual indicator, giving up to 100 dB at 1 m and 32 tones. Designed and tested to EN 54-3, EN 54-18 and EN 54-25 and certified by IMQ, with EN 54-23 also listed.
Wireless sounder with an integral detector base, 32 tones and 70 to 95 dBA output depending on the tone, with 3 volume levels. Designed and tested to EN 54-3 and EN 54-25 and certified by IMQ.
Wireless sounder base with an additional LED visual indicator flashing at 1 Hz, 32 tones and 70 to 95 dBA output depending on the tone. Designed and tested to EN 54-3 and EN 54-25 and certified by IMQ.
Wireless module with one supervised input, fully monitored for alarm and fault conditions, for bringing a contact into the system without a cable to the loop. Designed and tested to EN 54-18 and EN 54-25 and certified by IMQ.
Wireless module with one output, offering a changeover relay rated 2 A at 30 V DC and a site programmable 12 V or 24 V output. Designed and tested to EN 54-18 and EN 54-25 and certified by IMQ.
Loop powered addressable module that links Wave-Sense wireless devices to an addressable fire alarm loop. It handles 32 wireless detectors, call points, modules and sounders and works with up to 7 expander modules.
Wireless expander that extends the reach of a Wave-Sense system, handling up to 32 wireless field devices and linking back over up to 250 m in open space.
Wireless conventional interface module that handles up to 32 wireless detectors, call points, modules and sounders, with bi-directional communication.
First choose the system type. A conventional panel divides the building into zones and shows which zone is in alarm; Ceasefire's conventional panels run from 2 to 32 zones and are approved to EN 54-2 and 4. An addressable panel gives every detector and device its own address, so the panel shows the exact device in alarm. The Intelli-Sense addressable panels take up to 240 devices per loop, from 1 loop up to 8 loops, and network up to 2000 zones. A loop is the cable circuit that runs from the panel through all the devices and back.
Then pick the field devices. Multi-criteria detectors combine smoke and heat sensing, heat detectors respond to temperature instead of smoke, manual call points let people raise the alarm by hand, and sounders, beacons and base sounders give the warning. Detectors with a built-in isolator, or separate isolator modules, keep the rest of the loop working if the cable is shorted, and input, output and relay modules let the panel monitor contacts or switch other equipment.
Where cabling is difficult, Wave-Sense wireless devices join an addressable loop through a translator module, with expanders for more reach; each expander handles 32 wireless devices, and field devices reach up to 150 m in open space. For larger sites, network cards, remote terminals, graphic software, IP gateways and a BMS interface let you view and control the system from other buildings or a PC. FPS supplies, installs and maintains Ceasefire fire alarm systems in Bhopal and across Madhya Pradesh.
Try "landing valve", "Apollo call point", "9 kg ABC" or a model code.
No products yet. Tap "Add to quote" on any product, then send the whole list to us in one WhatsApp message.
